Datasheet

Section 4 Interrupt Controller
Page 108 of 982 REJ09B0465-0300 Rev. 3.00
Sep 17, 2010
H8S/20103, H8S/20203, H8S/20223, H8S/20115, H8S/20215, H8S/20235 Group
4.6.7 NMI Pin
The NMI pin is also used to set up entry to boot mode on exit from the reset state. In using the
NMI pin, note that the low-level should not be being applied to the NMI pins on exit from the
reset state (including power-on reset). In general, it is recommended that the connection of a pull-
up resistor to the NMI pin.