Instruction manual

R8A66597 USB Evaluation Board R0K866597D020BR
Hardware Instruction Manual
R19AN0005EJ0100 Rev.1.00 Page 6 of 26
Jan 10, 2012
3.2. Warning
WARNING
Warnings for Power Supply:
If you connect the attached power cable with the stabilized power supply, be sure to connect it with the
appropriate polarity (the red cable is connected to the power line. The black cable is connected to the
ground).
Use this product within the appropriate voltage range. This product does NOT have a built in over voltage
protection.
Do not touch the plug of the power cable when your hands are wet. This may cause electric shock.
If you need to use an AC adaptor, please confirm the connector shape, voltage and polarity. In addition,
use an AC power cable which complies with the safety standard of the country.
Do NOT use the power supply function on the emulator, when both the emulator and another power supply
are connected to this product at the same time.
When installing this equipment, insure that a reliable ground connection is maintained.
If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then
disconnect power immediately Do not use this as it is because of the danger of electric shock and/or fire. In
this case, contact your local distributor.
Before setting up this product and connecting it to other devices, turn off power or remove a power cable
to prevent injury or product damage.
Warnings to Be Taken for Handling:
Do not break down this product. Breaking down the product will void your warranty.
Warning for Installation:
Do not set this product in water or areas of high humidity. Make sure that the product does not get wet.
Spilling water or some other liquid into the product may cause un-repairable damage.
Warning for Use temperature:
This equipment is to be used in an environment with a maximum ambient temperature of 35°C.
Care should be taken that this temperature is not exceeded.