Instruction manual

R8A66597 USB Evaluation Board R0K866597D020BR
Hardware Instruction Manual
R19AN0005EJ0100 Rev.1.00 Page 3 of 26
Jan 10, 2012
2. Important
Before using this product, be sure to read this user’s manual carefully.
Keep this user’s manual, and refer to it when you have questions about this product.
Product:
"Product" in this document collectively refers to the following products manufactured by Renesas Electronics
Corporation
(1) R8A66597FP USB Evaluation Board R0K866597D020BR
"Product" herein encompasses neither the customer's user system nor the host machine.
Purpose of use of the product:
This product is a device to support the development of systems that uses the R8A66597FP. It provides support for
system development in both software and hardware.
Be sure to use this product correctly according to said purpose of use. Please avoid using this product other than for
its intended purpose of use.
For those who use this product:
This product can only be used by those who have carefully read the user’s manual and know how to use it.
Use of this product requires basic knowledge of electric circuits, logical circuits, and MCUs.
When using this product:
(1) This product is a development-support unit for use in your program development and evaluation stages. When a
program you have finished developing is to be incorporated in a mass-produced product, the judgment as to
whether it can be put to practical use is entirely your own responsibility, and should be based on evaluation of the
device on which it is installed and other experiments.
(2) In no event shall Renesas Electronics Corporation be liable for any consequence arising from the use of this
product.
(3) Renesas Electronics Corporation strives to provide workarounds for and correct trouble with products
malfunctions, with some free and some incurring charges. However, this does not necessarily mean that Renesas
Electronics Corporation guarantees the provision of a workaround or correction under any circumstances.
(4) This product covered by this document has been developed on the assumption that it will be used for program
development and evaluation in laboratories. Therefore, it does not fall within the scope of applicability of the
Electrical Appliance and Material Safety Law and protection against electromagnetic interference when used in
Japan.
(5) Renesas Electronics Corporation cannot predict all possible situations and possible cases of misuse that carry a
potential for danger. Therefore, the warnings in this user's manual and the warning labels attached to this product
do not necessarily cover all such possible situations and cases. The customer is responsible for correctly and safely
using this product.
(6) The product covered by this document has not been through the process of checking conformance with UL or other
safety standards and IEC or other industry standards. This fact must be taken into account when the product is
taken from Japan to some other country.
(7) This product is a product used for development of a program, and an evaluation stage. It cannot include in a user's
product and cannot mass-produce.
(8) Even if it is the case where fault is in the device carried in this product, it does not exchange for the fault repair
article of a device.
(9) Operation of all USB peripheral devices cannot be guaranteed.
(10) The sample programs of this product are all references, and no one to guarantee the operation. Please use this
sample program as a technological reference when customer's software is developed.