Instruction manual

R8A66597 USB Evaluation Board R0K866597D020BR
Hardware Instruction Manual
R19AN0005EJ0100 Rev.1.00 Page 10 of 26
Jan 10, 2012
Table 6.2 Assembly Components and Quantity
6.1. Connector Description (View from R8A66597)
Connectors JA1, JA2, JA4 and JA6 provide all bus interface pins of the chip, such as processor bus interface
and DMA interface. Therefore, these pins provide the same pin characteristics of the R8A66597FP such as
electric characteristic, I/O direction, and functions except for the signal with *. Note: All pins on JA5 are
unconnected.
The following table shows the pin number and function correspondences.
Table 6.1.1 Connector Description (View from R8A66597)
Pin Description of
R8A66597FP
Connector Pin Number of Connector Function of R8A66597FP
D15∼8
JA3
36∼29 (D15∼8)
Data bus (I/O)
D7/AD7∼D1/AD1
JA3
24∼18 (D7/AD7∼
D1/AD1)
Multiplex bus (I/O)
D0 JA3 17
Data bus (I/O)
A6∼1
JA3
7∼2
Address bus (I)
A7/ALE JA3 8
Address bus or ALE (I/I)
WR0_N* JA3 48
Write strobe (I)
WR1_N* JA3 47
Write strobe (I)
RD_N* JA3 25
Read strobe (I)
CS_N* JA3 27 (In case of CS1)
Chip select (I)
RST_N*** JA2 1
Reset (I)
DREQ0_N, JA6 1
DMA request (O)
DACK0_N** JA6 2
DMA acknowledge (I)
INT_N JA2 7
Interrupt (O)
DEND0_N JA6 3
End of DMA transfer (I/O)
VDD(EX_VCC) JA1 3
Power supply (3.3V) (I)
GND JA1 2,4
GND
GND JA2 4
GND
NC JA1
5∼22,24∼26
Unused pin
NC JA2
2,3,5,6,8,10∼22,24∼26
Unused pin
NC JA3
1,9∼16,26,28,37∼
46,49.50
Unused pin
NC JA5
1∼24
Unused pin
NC JA6
2∼24
Unused pin
*: Pulled up with 10kΩ
**: Pulled up 1MΩ
***: Connected to GND with 0.1µF
Component Name QTY
Evaluation board ( R0K866597D020BR ) 1
Power supply cable ( incl. 2P connector ) 1
Table of Toxic and Hazardous Substance and Elements 1
Release Note ( English ) 1
Release Note ( Japanese ) 1