Instruction manual

Renesas USB MCU and USB ASSP USB Basic Host and Peripheral firmware
R01AN0512EJ0210 Rev.2.10 Page 67 of 157
Apr 1, 2013
4.9.4 Workspace build configuration
USB-BASIC-F/W operation can easily be changed by selecting a different Build Configuration in HEW. Table 4-16
shows operation per respective build configuration.
Table 4-16 Build Configuration
Build Configuration Contents of Configuration
PERI Operate one port as peripheral.
PERI_HOST Operate both ports; one as peripheral and one as host.
The configurations that can be selected differ according to device.
Table 4-17 shows each device and valid configurations.
Table 4-17 Valid device and Build Configuration combinations.
Build Configuration
Device
PERI
HOST PERI_HOST
RX62N O O O
RX630 O -- --
RX63N O O O
RX63T O O --
R8A66593 O -- --
R8A66597 O O --