Instruction manual

Renesas USB MCU and USB ASSP USB Basic Host and Peripheral firmware
R01AN0512EJ0210 Rev.2.10 Page 129 of 157
Apr 1, 2013
5.11.3 Workspace build configuration
File inclusion and exclusion, depending on whether host or peripheral functionality (or both) was selected in the user
configuration file r_usb_usrconfig.h, is changed simply be selecting the proper Build Configuration.
Table 5.18 shows
the operation per respective Build Configuration .
Table 5.18 Build configuration
Build Configuration Content of configuration
HOST Operate 1 USB port as a host.
PERI_HOST Operate 2 USB ports as the peripheral and host, respectively.
The configurations that can be selected differ according to the device.
Table 5.19 shows each device and valid
configuration.
Table 5.19 Configuration conversion table
Build Configuration
Device
PERI HOST PERI_HOST
RX62N ○ ○ ○
RX630 ○ × ×
RX63N ○ ○ ○
RX63T ○ ○ ×
R8A66597 ○ ○ ×