User manual

RSK+RX62N 6. Configuration
REJ10J2198-0201 Rev. 2.01 Page 38 of 54
Nov 30, 2011
Reference Link Fitted Configuration Link Removed Configuration Related Ref.
R225 Connects MTIOC6A (MCU, pin F14)
to header JA1, pin 23 (via R107).
Disconnects MTIOC6A (MCU, pin
F14) from header JA1, pin 23 (via
R107).
R107, R224
R226 Connects IRQ8-A (MCU, pin C1) to
header JA2, pin 7 (via R35).
Disconnects IRQ8-A (MCU, pin C1)
from header JA2, pin 7 (via R35).
R35, R227
R227 Connects MTIOC0A (MCU, pin J4) to
header JA2, pin 7 (via R71).
Disconnects MTIOC0A (MCU, pin J4)
from header JA2, pin 7 (via R71).
R71, R226
R228 Connects IRQ9-A (MCU, pin D2) to
header JA2, pin 9 (via R38).
Disconnects IRQ9-A (MCU, pin D2)
from header JA2, pin 9 (via R38).
R38, R229
R229 Connects MTIOC0B (MCU, pin N5) to
header JA2, pin 9 (via R51).
Disconnects MTIOC0B (MCU, pin N5)
from header JA2, pin 9 (via R51).
R51, R228
R230 Connects IRQ2-A (MCU, pin J2) to
header JA2, pin 23 (via R67).
Disconnects IRQ2-A (MCU, pin J2) to
header JA2, pin 23 (via R67).
R67, R231
R231 Connects MTIOC1A (MCU, pin N3) to
header JA2, pin 23 (via R56).
Disconnects MTIOC1A (MCU, pin N3)
from header JA2, pin 23 (via R56).
R56, R230
R240 Connects MTIOC7A (MCU, pin H14)
to header JA5, pin 9 (via R113).
Disconnects MTIOC7A (MCU, pin
H14) from header JA5, pin 9 (via
R113).
R113, R241
R241 Connects MTIOC6B (MCU, pin G15)
to header JA5, pin 9 (via R109).
Disconnects MTIOC6B (MCU, pin G15)
from header JA5, pin 9 (via R109).
R109, R240
Table 6-17: MTU Option Links – Part 4
Table 6-18 below details the different configurations and functions of the MTU jumpers.
Reference Position One Position Two Position Three Related Ref.
J3* Pins 1 and 2 shorted.
Connects OEn (U3, pin
19) to GROUND
(bypassed by R33).
All pins open.
Disconnects OEn (U3,
pin 19) from GROUND
(still connectable via
R33).
- R33
J4* Pins 1 and 2 shorted.
Connects OEn (U4, pin
19) to GROUND
(bypassed by R34).
All pins open.
Disconnects OEn (U4,
pin 19) from GROUND
(still connectable via
R34).
- R34
J22 Pins 1 and 2 shorted.
Connects USB0VBUS
EN-A_MTIOC4A-A
_MTCLKA-A to USB IC
U13, pin 4.
Pins 2 and 3 shorted.
Connects USB0VBUS
EN-A_MTIOC4A-A
_MTCLKA-A to header
TFT, pin 27.
All pins open. Discon-
nects both lines.
R62
J23 Pins 1 and 2 shorted.
Connects CT0X_IRQ2-A
_MTIOC0C to the CAN
transceiver (U12, pin 1)
via R242.
Pins 2 and 3 shorted.
Connects CT0X
_IRQ2-A_MTIOC0C to
header TFT, pin 24.
All pins open. Discon-
nects both lines.
R67, R242
Table 6-18: MTU Jumpers
*By default, this jumper is not fitted to the RSK+. Therefore the default configuration is all pins open.