Technical information

Rev. 5.00 Aug. 18, 2009 Page v of vi
REJ10J1237-0500
Contents
Section 1 System Configuration ........................................................................1
1.1 Components of the Emulator ............................................................................................ 1
1.2 System Configuration ....................................................................................................... 8
Section 2 Connecting the Emulator to the User System ....................................11
2.1 Connecting the Emulator to the User System by Using the EV-chip Unit........................ 11
2.1.1 Connecting the EV-chip Unit to the Emulator..................................................... 11
2.1.2 Connecting the E200F External Bus Trace Unit to the EV-chip Unit ................. 13
2.1.3 Connecting the Probe Head to the EV-chip Unit ................................................. 15
2.1.4 Connecting the E200F Emulation Memory Unit to the EV-chip Unit................. 16
2.1.5 Connecting the E200F External Bus Trace Unit, Emulation Memory Unit,
and EV-chip Unit.................................................................................................18
2.1.6 Connecting the EV-chip Unit to the User System Interface Board...................... 19
2.2 Connecting the Emulator to the User System by Using the H-UDI Port Connector......... 20
2.3 Installing the H-UDI Port Connector on the User System ................................................ 21
2.4 Pin Assignments of the H-UDI Port Connector ................................................................ 21
2.5 Recommended Circuit between the H-UDI Port Connector and the MCU ......................23
2.5.1 Recommended Circuit (36-Pin Type)..................................................................23
Section 3 Software Specifications when Using the SH7080 Series/SH7146
Series/SH/Tiny Series ......................................................................25
3.1 Differences between the MCU and the Emulator ............................................................. 25
3.2 Specific Functions for the Emulator when Using the SH7080 Series/SH7146
Series/SH/Tiny Series ....................................................................................................... 33
3.2.1 Event Condition Functions .................................................................................. 33
3.2.2 Trace Functions.................................................................................................... 40
3.2.3 Notes on Using the JTAG (H-UDI) Clock (TCK) and AUD Clock (AUDCK)... 53
3.2.4 Notes on Setting the [Breakpoint] Dialog Box .................................................... 53
3.2.5 Notes on Setting the [Event Condition] Dialog Box
and the BREAKCONDITION_ SET Command.................................................. 53
3.2.6 Performance Measurement Function ................................................................... 54
Section 4 User System Interface Circuits ..........................................................59
4.1 User System Interface Circuits.......................................................................................... 59
4.2 User System Interface Board Circuits............................................................................... 71
4.3 Delay Time for the User System Interface........................................................................ 77