Technical information

Section 3 Software Specifications when Using the SH7080 Series/SH7146 Series/SH/Tiny Series
Rev. 5.00 Aug. 18, 2009 Page 35 of 78
REJ10J1237-0500
Notes: 1. O: Can be set in the dialog box.
X: Cannot be set in the dialog box.
2. For the Action item,
B: Setting a break is enabled. (For the count condition, setting a break is only enabled.)
T1: Setting the trace halt and acquisition conditions are enabled for the internal trace.
T2: Setting the trace halt is enabled for the internal trace.
T3: Setting the trace halt and point-to-point is enabled for the internal trace.
P: Setting a performance-measurement start or end condition is enabled.
3. Ch1 to Ch4 are available when the EV-chip unit is not connected to the emulator and
R5F70834A, R5F70835A, R5F70844A, R5F70845A, R5F70854A, R5F70855A,
R5F70865A, R5F71464R, R5F71494R, or R5F71491R is used.