Technical information

5-1
Section 5. Warnings
• Make sure that pin 1 on the IC socket is correctly aligned with pin 1 on the QFP 80 SUB board of the
user cable header before inserting the QFP 80 SUB board into the IC socket on the user system.
• Do not apply excessive force to the user system interface cable while it is connected to the user
system.
• This user system interface cable is specifically designed for the ALE300L-H8/3800 emulator. Do not
use this cable with any other emulator.
• This user system interface cable can be operated with an external crystal oscillator installed onto the
user system. The clock signal is buffered and with a propagation delay of 6nsec (max.)