Technical information

Section 5 Verifying Operation
Rev. 1.00 Jul. 03, 2009 Page 30 of 32
REJ10J2026-0100
3. When connecting the E200F emulator and the user system with the common user-system
interface adaptor cable and the user system converter board, the wiring of the circuit between
the IC socket pins and pins of the devices on the user system leads to delay times for the
signals.
⎯ When the connection includes the flexible cable
Table 3 gives the delay times when the common user-system interface cable is used with the
supplied flexible cable.
Table 3 Delay Times Created by Connection with the Flexible Cable
No. Signal Name Delay Time (ns)
1 _RES 22
2 NMI 19
3 Other signals 6
⎯ When the connection does not include the flexible cable
Table 4 shows the delay time generated when the supplied flexible cable has been removed
from the common user-system interface adaptor cable.
Table 4 Delay Times Created by Connection without the Flexible Cable
No. Signal Name Delay Time (ns)
1 _RES 19
2 NMI 16
3 Other signals 3