To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.
Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office.
User’s Manual PCA7429G02 User’s Manual PROM Programming Adapter for M37272E8SP/ M37272EFSP Rev.1.00 2003.
• • • • • Microsoft, MS, MS-DOS, Windows and Windows NT are registered trademarks of Microsoft Corporation. IBM, AT, PS/2 and OS/2 are registered trademarks of International Business Machines Corporation. IC61-080-081, IC61-080-046 and IC61-080-079 are products of Yamaichi Electronics Co., Ltd. AXS4803M19 and AXS4802M1 are products of Matsushita Electric Works, Ltd. HQPACK, NQPACK, TQPACK, YQPACK, YQSOCKET and YQ-Guide are products of Tokyo Eletech Corporation.
Contents 1. Precautions for Safety ......................................................................................................... 4 1.1 Safety Symbols and Meanings .............................................................................. 4 2. Introduction ........................................................................................................................ 6 2.1 Things to Check When Unpacking ....................................................................... 6 3.
Chapter 1. Precautions for Safety In both the user's manual and on the product itself, several icons are used to insure proper handling of this product and also to prevent injuries to you or other persons, or damage to your properties. This chapter describes the precautions which should be taken in order to use this product safely and properly. Be sure to read this chapter before using this product. 1.
WARNING Warnings for Use Environment: • This equipment is to be used in an environment with a maximum ambient temperature of 35˚C. Care should be taken that this temperature is not exceeded. • Select the proper programming mode of the PROM programmer. CAUTION Cautions to Be Taken for This Product: • Do not disassemble or modify this product. Disassembling or modifying this product can cause damage. Disassembling and modifying the product will void your warranty. • Use caution when handling this product.
2. Introduction This product is a PROM programming adapter for 8-bit microcomputers of 7200 Series. The adapter is a tool that can be used to write a program into internal ROM of microcomputers using a commercially available PROM programmer. This manual describes the specifications and operational procedures of PCA7429G02. Figure 2.1 shows the external view of the PCA7429G02 and its constituent parts. Figure 2.1 External view and constituent parts of PCA7429G02 2.
3. Specifications Table 3.1 lists specifications of the PCA7429G02. Table 3.1 Specifications of PCA7429G02 MCU type Operating clock frequency Power supply MCU socket PCA7429G02 Board configuration PCA7402E M37272E8SP, M37272EFSP 8MHz (Supplied by the ceramic oscillator mounted on the adapter) Supplied from VCC of PROM programmer IC59-4206-G4 (Yamaichi Electronics Co., Ltd.) Board to insert the programmable MCU (IC socket is mounted on this board.
4. How to Write the Program This chapter describes procedures you need to follow when writing a program. For details on how to operate the PROM programmer, refer to the user's manual included with the PROM programmer. 4.1 Programming Procedure Follow procedures (1) to (8) to write a program. (1) Read the program. Read the program into the PROM programmer. (2) Attach the adapter to the PROM programmer. (see section 4.2) (3) Set the jumper switch (SW1). (see Section 4.
4.2 Attaching Adapter to PROM Programmer As shown in Figure 4.1, attach the adapter's bottom board (PCA7402E) to the IC socket of PROM programmer, with the pin No. 1 of the adapter matched to the pin No. 1 of the IC socket . Be careful when attaching to the PROM programmer because incorrect insertion can cause fatal damage to the MCU. Figure 4.
4.3 Setting Jumper Switches Switch settings for SW1 is shown in Table 4.1 and Figure 4.2 below. Table 4.1 Switch settings for SW1 MCU type name SW1 M37272E8SP E8 M37272EFSP EF Figure 4.2 Switch settings for SW1 4.4 Inserting MCU into Adapter As shown in Figure 4.3 insert the MCU into the IC socket, with the pin No. 1 of the MCU matched to the pin No. 1 of the IC socket on the adapter. Be careful when inserting the MCU because incorrect insertion can cause fatal damage to the MCU. Figure 4.
4.5 Precautions When Handling Adapter Don't touch the connector in the IC socket and the pins on the PROM programmer connector. Otherwise it can cause an electrical insulation failure because of dirt. When not using, attach the connector pins of this product to the conductive sponge as it was shipped from the factory. 4.6 Setting Programming Area Always be sure to specify the programming area before writing the program into the MCU. This is also required for devices programmed using a PROM programmer.
6. Memory Map Figures 6.1 and 6.2 show the MCU and the PROM programmer memory maps (programming areas). 0000016 0000016 013FF16 0140016 013FF16 0140016 OSD ROM 256 kinds OSD ROM 256 kinds 03BFF16 03C0016 03BFF16 03C0016 07FFF16 0800016 07FFF16 0800016 Internal ROM area (32K bytes) Programming area 0FFFF16 1000016 0FFFF16 1FFFF 16 PROM programmer (M5M27C101 mode) MCU (M37272E8SP) Figure 6.
0000016 0000016 00FFF16 0100016 00FFF16 0100016 Internal ROM area (60K bytes) Programming area 0FFFF16 1000016 0FFFF16 1000016 113FF16 1140016 113FF16 1140016 OSD ROM 256 kinds OSD ROM 256 kinds 13BFF16 13C0016 13BFF16 13C0016 1FFFF16 1FFFF 16 PROM programmer (M5M27C101 mode) MCU (M37272EFSP) Figure 6.
7. How to Request for Support After checking this manual, fill in the following information and email to your local distributor. For prompt response, please specify the following information: (1) Contact address • Company name • Department • Responsible person • Phone number • Fax number • E-mail address (2) Product information • Name of the programming adapter • Serial number • Date of purchase • Target MCU • Symptoms (Fails blank check/Cannot write a program/Fails verification etc.
PCA7429G02 User's Manual Rev.1.
PCA7429G02 User’s Manual 1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 Japan REJ10J0249-0100Z
