User`s manual

PCA7412x-xxx User's Manual Precautions for Safety
WARNING
Warnings to Be Taken for Handling:
Do not modify this product. Personal injury due to electric shock may occur if this product is modified. Modifying
the product will void your warranty.
Warnings for Installation:
Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling
water or some other liquid into the product may cause unrepairable damage.
Warnings for Storage when Not Using This Product for a Long Time:
(1) Attach the connector pins of this product to the conductive sponge included in the package.
(2) Put it into a conductive polyvinyl, and keep it in the package case shipped from the factory.
(3) Store it in the place where humidity and temperature are low and direct sunshine does not strike.
Warnings for Ambient Temperatures:
Do not use if the ambient temperature exceeds the rated maximum ambient temperature.
The rated maximum ambient temperature of this product is 35°C.
Warnings when Using the PROM Programmer:
Select the proper programming mode of the PROM programmer.
Be sure to set the programming area as described in this user's manual.
Do not use the PROM programmer's device identification code readout function.
CAUTION
Cautions to Be Taken for Handling:
Use caution when handling this product. Be careful not to apply a mechanical shock.
Do not directly touch the connector pins of this product. Static electricity may damage the internal circuits. Be
careful with the static electricity when handling this product and the MCU.
Attach this product to the IC socket on the PROM programmer properly.
Insert the MCU to the IC socket of this product properly.
When opening and closing the IC socket of this product, be sure to keep it horizontal.
Cautions to Be Taken for Repair
We cannot accept any request for repair.
Cautions to Be Taken for Disposal:
Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
European Union regulatory notices
Renesas development tools and products are directly covered by the European Union's Waste Electrical and
Electronic Equipment, (WEEE), Directive 2002/96/EC. As a result, this equipment, including all accessories, must
not be disposed of as household waste but through your locally recognized recycling or disposal schemes. As part
of our commitment to environmental responsibility Renesas also offers to take back the equipment and has
implemented a Tools Product Recycling Program for customers in Europe. This allows you to return equipment to
Renesas for disposal through our approved Producer Compliance Scheme. To register for the program, click here
“
http://www.renesas.com/weee".
R20UT0274EJ0200 Rev.2.00 Page 6 of 24
Oct 16, 2010