User`s manual

PCA7412x-xxx User's Manual 2．Usage (How to Write the Program)
2.5 Setting the Programming Area
To write the program into an MCU, be sure to set the programming area. And also, specify its device of the PROM
programmer. For programming areas and devices, see
Table 2.2 and Table 2.3.
Table 2.2 List of programming areas (other than M16C/6V)
MCU type name PROM programmer
MCU
Example
ROM size
Device Programming area
ROM area
of MCU
M30612E4FP M306XXE4
M30613E4TGP
32KB 18000h-1FFFFh F8000h-FFFFFh
M306XXE8 M30600E8FP 64KB 10000h-1FFFFh F0000h-FFFFFh
M306XXEA N/A 96KB
M5M27C101
08000h-1FFFFh E8000h-FFFFFh
M306XXEC M30610ECFP 128KB M5M27C201 20000h-3FFFFh E0000h-FFFFFh
Table 2.3 List of programming areas (M16C/6V)
MCU type name PROM programmer
MCU
Example
ROM size
Device Programming area
ROM area
of MCU
OSD ROM
(128KB)
10000h-2FFFFh 90000h-AFFFFh
M306VXEE M306V2EEFS
Internal ROM
(192KB)
M5M27C401
50000h-7FFFFh D0000h-FFFFFh
CAUTION
• Specify a proper programming mode, because an incorrect setting can cause fatal damage to the MCU.
• The programming method for M5M27C101, M5M27C201 or M5M27C401 mode is the byte-programming
method.
R20UT0274EJ0200 Rev.2.00 Page 17 of 24
Oct 16, 2010