User`s manual

PCA7412x-xxx User's Manual 2．Usage (How to Write the Program)
2.3 Switch Settings
The position of the JP1 and its default setting are shown in
Figure 2.2. For how to set the switch, see Table 2.1.
Top view
1
11
J2
1818
JP1
1M
4M
PCA7412F-100 REV.A
J1
S
JAPAN
Figure 2.2 Position of the JP1 switch
Table 2.1 Setting the JP1 switch
Group Example JP1
Other than M16C/6V M30612E4-XXXFP
1M
M16C/6V M306V2EEFP
4M
CAUTION
• Make the setting properly, because an incorrect setting can cause fatal damage to the MCU.
• Select the proper programming mode of the PROM programmer.
• An example setting shown in
Figure 2.2 is also applied to the PCA7412L-100, PCA7412G-100,
and PCA7413F-80.
• To use this product in M27C201 mode, set the JP1 switch to the 1M side.
R20UT0274EJ0200 Rev.2.00 Page 14 of 24
Oct 16, 2010