Technical information

3800 GROUP USER’S MANUAL
APPENDIX
3.1 Electrical characteristics
3-8
3.1.5 Absolute maximum ratings (Extended operating temperature version)
Table 3.1.12 Absolute maximum ratings (Extended operating temperature version)
Power source voltage
Input voltage P00–P07, P10–P17, P20–P27,
P30–P37, P40–P47, P50–P57,
P60–P67, P70, P71
Input voltage RESET, XIN
Input voltage CNVSS
Output voltage P00–P07, P10–P17, P20–P27,
P30–P37, P40–P47, P50–P57,
P60–P67, P70, P71, XOUT
Power dissipation
Operating temperature
Storage temperature
Symbol Parameter Conditions Ratings
–0.3 to 7.0 V
Unit
Ta = 25 °C
All voltages are based on VSS.
Output transistors are cut off.
Note 1: The total output current is the sum of all the currents flowing through all the applicable ports. The total average current is an aver-
age value measured over 100 ms. The total peak current is the peak value of all the currents.
2: The peak output current is the peak current flowing in each port.
3: The average output current I
OL(avg), IOH(avg) in an average value measured over 100 ms.
5.5Power source voltage
Power source voltage
“H” input voltage P0
0–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71
“H” input voltage RESET, XIN, CNVSS
“L” input voltage P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71
“L” input voltage RESET, CNVSS
“L” input voltage XIN
“H” total peak output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“H” total peak output current P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“L” total peak output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“L” total peak output current P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“H” total average output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“H” total average output current P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“L” total average output current P00–P07, P10–P17, P20–P27, P30–P37 (Note 1)
“L” total average output current P40–P47,P50–P57, P60–P67, P70, P71 (Note 1)
“H” peak output current P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 2)
“L” peak output current P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 2)
“H” average output current P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 3)
“L” average output current P00–P07, P10–P17, P20–P27, P30–P37, P40–P47,
P50–P57, P60–P67, P70, P71 (Note 3)
Internal clock oscillation frequency
VCC
VSS
VIH
VIH
VIL
VIL
VIL
ΣIOH(peak)
ΣIOH(peak)
ΣIOL(peak)
ΣIOL(peak)
ΣIOH(avg)
ΣIOH(avg)
ΣIOL(avg)
ΣIOL(avg)
IOH(peak)
IOL(peak)
IOH(avg)
IOL(avg)
f(XIN)
Symbol Parameter
Limits
Min.
V
V
Unit
Table 3.1.13 Recommended operating conditions (Extended operating temperature version)
(VCC = 4.0 to 5.5 V, Ta = –40 to 85 °C, unless otherwise noted)
3.1.6 Recommended operating conditions (Extended operating temperature version)
4.0 5.0
0
Typ. Max.
VCC
VI
VI
VI
VO
Pd
Topr
Tstg
–0.3 to VCC +0.3
–0.3 to V
CC +0.3
–0.3 to 13
–0.3 to VCC +0.3
1000(Note)
–40 to 85
–65 to 150
V
V
V
V
mW
°C
°C
0.8 V
CC
0.8 VCC
0
0
0
V
CC
VCC
0.2 VCC
0.2 VCC
0.16 V CC
–80
–80
80
80
–40
–40
40
40
–10
10
–5
5
8
V
V
V
V
V
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
mA
MHz
Note : 300 mW in case of the flat package.