User`s manual

5 Setup the Debugger

5.4.1.1.1. Inspecting the MCU status

Clicking this tab displays the status of each MCU pin. It allows to check whether the MCU pin status

matches the processor mode to be set.

"NC" means that the value is indeterminate.

5.4.1.1.2. Setting the Debug Option

Click this check box if you do not want the program to be downloaded into the MCU's internal flash

ROM. You may need to select this option when the internal flash ROM cannot be rewritten such as

when using the MCU at low voltage. Initially, this option is deselected. When your system uses the

mcu over 10MHz operating freqency, if you check the option, your system will not work correctly. In

this case, please don't check this option.

5.4.1.2 MAP Tab

The specified content becomes effective when the next being start.