User`s manual

5.4.1.1 MCU Tab

The specified content becomes effective when the next being start.

Select the Processor Mode

Specify the processor mode for the target system.

Either the following can be specified.

• Single-chip Mode

Single-chip Mode

• Memory Expansion Mode

Memory Expansion Mode

• Microprocessor Mode

Microprocessor Mode

Also, you need to specify the following information according to the processor mode you've selected

• External Data Bus Width

If you selected memory extension or microprocessor mode, specify "16-bit" or "8-bit" for the

external bus width. Make sure the specified external bus width matches settings of the BYTE

pin.

• Memory Space Expansion

If you selected memory extension or microprocessor mode, specify whether or not to use the

memory space expansion facility. Select "4MB Mode" if you want to use the memory space

expansion facility or "Normal Mode" if you do not.

• PM13(b3 of 000005H)

Specify whether you set the bit PM13 (b3 of 000005H). When you use your target system with the

setting that PM13 is 1, check this option.

• PM10(b0 of 000005H)

Specify whether you set the bit PM10 (b0 of 000005H). When you use your target system with the

setting that PM10 is 1, check this option.