User`s manual

The setting of the emulation memory area varies depending on the specified processor mode.
Single-chip Mode
You do not need to specify the area to be assigned as the emulation memory.
The internal ROM area is automatically mapped into the emulation memory. The address range
of the automatically mapped area is displayed in the Internal ROM Area: field.
Memory Expansion Mode(8bit and 16bit)
If you have an area to be assigned as the emulation memory in addition to internal ROM area,
specify it specify it separately.
The internal ROM area is automatically mapped into the emulation memory. The address range
of the automatically mapped area is displayed in the Internal ROM Area: field.
Microprocessor Mode(8bit and 16bit)
Specify the area to be assigned separately. (There is no area which is automatically assigned.)
ATTENTION
The mapping setting data specified using the Map command is not reflected to the Emem dialog
box.
et the emulation memory areas in the order of usage priority.
The emulation memory areas to be set by the Map command are numbered, ignoring the unused
(Not Use) areas.
Accordingly, the emulation memory areas set in the Emem dialog box and the emulation memory
area numbers set by the Map command will be mismatched.
5.3.1.3 Flash Clear Tab
The specified content becomes effective when the next being start.
5.3.1.3.1. Setting to clear the MCU's internal flash ROM
Specify whether or not to clear the contents of the MCU's internal flash ROM when downloading the
target program or data.
The MCU's internal flash ROM is displayed block by block in the list view.
The blocks whose check marks are turned on do not have their flash contents cleared when
downloading. The memory contents in places not overwritten by downloading remain intact.
The blocks whose check marks are turned off have their flash contents cleared when
downloading.
Pressing the Select All button keeps all blocks from being cleared when downloading.
Pressing the Clear All button clears all blocks when downloading.
50