User`s manual

Note

* The accuracy of the clock frequency is plus or minus 5%. We recommend that final evaluation be

made after installing the resonator or oscillator module whose frequency is matched to the actually

used Internal clock.

5.1.3.2 Selecting event output/trigger input cable

Select the input/output direction of cable for the PC7501's event output/trigger input.

• To enter external triggers from the cable, select "Input from External Trigger."

• To output events to the cable, select "Output Events."

The contents set here are reflected at only startup time. If settings are changed in the Init dialog box

after starting the debugger, the change is not reflected.

Note that "Input from External Trigger" is selected at startup. (The contents that were set the last

time the debugger started have no effect.)

5.1.3.3 Attempt to access memory during WAIT/STOP mode

Set this check on, when the mcu needs to access memory during WAIT/STOP mode.

When this check is ON, debugger will attempt to access memory by waiting for about 5 seconds until

the mcu returns from WAIT/STOP mode. If the mcu remains WAIT/STOP mode during this period,

the operation will receive an error. When this check is OFF, debugger will receive an error without

accessing to real memory.