User`s manual

5 Setup the Debugger

5. Setup the Debugger

5.1 Init Dialog

The Init dialog box is provided for setting the items that need to be set when the debugger starts up.

The contents set from this dialog box are also effective the next time the debugger starts. The data set

in this dialog remains effective for the next start.

The tabs available on this dialog box vary with each product used. For details, click the desired tab

name shown in the table below.

Product Name

Tab Name

The debugger for M32C The debugger for M16C/R8C

MCU Exist Exist

Debugging Information Exist Exist

Emulator Exist Exist

Script Exist Exist

You can open the Init dialog using either one of the following methods:

• After the debugger gets started, select Menu - [Setup] -> [Emulator] -> [System...].

• Start Debugger while holding down the Ctrl key.