User`s manual

12 Attention
12.3.10 CPU rewrite
• Please don't rewrite the last block. If you did, emulator gets out of control.
• When you enabled CPU rewrite mode, you can not use the debug functions below:
- Setting software break points to the internal flash ROM
- COME execution to the internal flash ROM
• You can not use the functions below to the CPU rewrite control program (from setting CPU
rewrite mode select bit to clearing it). If you use these functions, it may be unable to shift to CPU
rewrite mode, or the contents of a flash ROM may be unable to be read to normalcy.
- Single step
- Software break points
- Address match interrupt break points
- Hardware break points
- COME execution
To see the data which were rewritten by the program, break the program out of the CPU rewrite
control program and see by dump window, memory window, and so on.
12.3.11 MR STK script command
• In the MR STK SYS and MR STK TSK script command, if the address range of a stack area is
across the boundary of the coverage measurements area, the coverage measurement result of the
stack area is not displayed correctly (always displayed as "*****").
269