User`s manual

2. About the Emulator PC7501

The PC7501 emulator has full bus trace and is available for in-circuit emulation in system designed

around the M16C Platform of processors. This compact unit is capable of emulation up to 66MHz (i.e.,

available at over 20MHz). When combined with an emulation probe suitable for the target MCU, it

helps to configure an emulator system matched to each MCU used.

2.1 Communication method

The supported communication methods are as follows.

Emulato rI/F

PC7501

USB Support

LAN Support

LPT Support

Depending on communication methods, it is necessary to set up some items before the debugger can

be started. Please see "

3.3 Setting before emulator starts ".

2.2 Function table

The supported functions are as follows.

Function PC7501

SW Break 64 point s

HW Break 8 points

Address Interrupt Break 4 points*

Real-Time Trace 256K Cycles

RAM Monito r 4K bytes (256bytes x 16bloc s) area k

C0 Coverage 256K bytes x 32blocks area

Time Measurement Go to Stop / 4 points interval

Protect Break Access Protect Break

*Depends on the target MCU used.