User`s manual

7Windows/Dialogs
7.9 Address Interrupt Break Point Setting Window
The Address Interrupt Break Point Setting window allows you to set address interrupt break points.
This function stops the target program immediately before executing an instruction at a specified
address. This function is realized by using the MCU's address match interrupt. So that the address
interrupt break function can only be used when the address match interrupt is not used in the user
application.
• This window is available only when the address interrupt break function is used.
Use the MCU tab in the Init dialog box to specify whether or not to use the address interrupt
break function. On this tab, select the Enable the Address Match Interrupt Break Function check
box.(Details).
• The number of address interrupt breakpoints that can be set varies with each product.
• Breakpoints can be specified by "Address" or "Filename + Line No.".
• If you have set multiple breakpoints, program execution stops when any one break address is
encountered (OR conditions).
• You can clear, enable or disable breakpoints selected by clicking in the breakpoint display area.
You can also enable and disable breakpoints by double-clicking on them.
• Click on the "Save" button to save the software break points in the file. To reload software break
point settings from the saved file, click the "Load" button.
• If you load breakpoints from a file, they are added to any existing break points.
141