User guide

CSPC7501R-2:1
vi
What this guide contains
IAR C-SPY Hardware Debugger Systems
User Guide
Note that additional features may have been added to the software after the IAR C-SPY
Hardware Debugger Systems User Guide was produced. The release notes contain the
latest information.
What this guide contains
Below is a brief outline and summary of the chapters in this guide.
● Introduction to C-SPY hardware debugger systems introduces you to the available
C-SPY hardware debugger systems to be used with the target board. The chapter
briefly shows the difference in functionality provided by the different C-SPY
drivers.
● Setting up C-SPY hardware debugger systems describes the general options that
must be set for all hardware debugger systems.
● Using the emulator describes the additional options, menus, and features provided
by the emulator debugger systems.
Other documentation
The complete set of IAR development tools for the target processor are described in a
series of guides. For information about:
● Programming for the IAR Compiler, refer to the IAR C/C++ Compiler Reference
Guide
● Programming for the IAR Assembler, refer to the IAR Assembler Reference Guide
● Using the IAR XLINK Linker, the IAR XAR Library Builder, and the IAR XLIB
Librarian, refer to the IAR Linker and Library Tools Reference Guide
● Using the IAR CLIB or DLIB library, refer to the IAR Embedded Workbench IDE
online help system.
All of these guides are delivered in hypertext PDF or HTML format on the installation
media. Some of them are also delivered as printed books.
Recommended web sites:
● The Renesas web site, www.renesas.com, contains information and news about the
target processors.
● The IAR Systems web site, www.iar.com, holds application notes and other
product information.
● Finally, the Embedded C++ Technical Committee web site,
www.caravan.net/ec2plus, contains information about the Embedded C++
standard.