User guide

CSPC7501R-2:1
16
Emulator menu
IAR C-SPY Hardware Debugger Systems
User Guide
DOWNLOAD FIRMWARE
If you need to download new firmware, for example if you are changing the processor
configuration or if you need to upgrade the firmware, choose the Emulator>Download
Firmware command. The emulator firmware files have the filename extension
.s and
are located in subdirectories of the target_processor\config\Renesas\ directory
of your product installation.
TCP/IP SETUP
Opens a dialog box where you can assign a TCP/IP address to the PC7501 Emulator.
The first time you do this, you must connect to the emulator via USB. After you have
changed a TCP/IP address, you must switch the emulator off and then on again for the
change to take effect.
TR AC E S E T U P
Opens a dialog box where you can make some basic trace settings.
Figure 11: Trace Setup dialog box
Option Description
Time measurement
source
This option decides whether the clock tick counter takes its value
from a built-in 16 MHz clock or increments per executed machine
instruction (Machine cycles). This value is used by both the cycle
counter and the Trace window.
Trace buffer size The size of the trace buffer in bytes. The trace buffer can be between
10 and 262143 bytes. The larger the buffer is, the longer it takes each
time you stop.
Table 5: Trace Setup options