User`s manual

9 / 46
CAUTION
Cautions for AC Adapter:
• Use only the AC adapter included in this product package.
• The included AC adapter is for PC7501. Do not use it for other product.
• Before installing this equipment or connecting it to other equipment, disconnect the AC
power cable from its outlet to prevent injury or accident.
• The DC plug on the included AC adapter has the below polarity.
• The included AC adapter has no power supply switch. The AC adapter is always
active while connecting the AC power cable. Check if the power is supplied by the LED
of AC adapter.
Cautions to Be Taken for This Product:
• Use caution when handling this product. Be careful not to apply a mechanical shock.
• Do not touch the connector pins of the emulation probe and the interface connector
pins directly with your hand.
• Do not pull the main unit by the probe of the emulation probe or the flexible cable
which are connected to this product.
• Excessive flexing or force of the flexible cable for connecting this product to the
emulation probe may break connector.
• Do not use inch-size screws for this equipment. The screws used in this equipment
are all ISO type (meter-size) screws. When exchanging screws, use same type screws
as equipped before.
Caution for AC Power Supply:
• When installing or connecting this product with other equipment, shut down AC power
or disconnect the AC power cord from the equipment to prevent personal injury or
damage to the equipment.
Caution for Installation:
• When in use do not place the emulator PC7501 on its side.
Caution for Communication Interface:
• Always make sure that the emulator PC7501's interface selection switch and the
emulator debugger M3T-PDxxF's interface settings are matched.