User`s manual

35 / 46
4.5 Self-check
IMPORTANT
The self-check is a function to check the memory and other conditions of the emulator PC7501's
internal circuit boards. This function can only be executed after the emulator PC7501 is connected
to an emulation probe.
IMPORTANT
When executing the self-check, be sure to disconnect the target system.
IMPORTANT
Before executing the self-check, you may need to change settings of the emulation probe, so read
the user's manual of the emulation probe.
Figure 4.11 shows a transition of LEDs' on/off conditions during the self-check. Required time for
the self-check is about 30 seconds.
Figure 4.11 LED display during the self-check
:AIMREMAMCE LNDE QRAPRED
8>><> .
?598 AMD 8>><> FKAQHIMNMERILE,
8>><> /
?598 FKAQHEQ AMD 8>><> KIGHRQ,
8>><> 0
?598 AMD 8>><> FKAQHAKREPMAREKU,
8>><> 1
?598 GNEQ NSR AMD 8>><> KIGHRQ,
?EKF+CHECJ REPLIMARED MNPLAKKU
8LSKARINM OPNBE AMD FIPLTAPE
DN MNR LARCH
=732-. QUQREL QRARSQ EPPNP
8LSKARINM OPNBE IMIRIAKIVARINM EPPNP
8LSKARINM OPNBE QRARSQ EPPNP
4<;
4 <99
4 6KIMJIMG
W @HEM RHE =732-. QUQREL IQ MNR TNPJIMG OPNOEPKU
W @HEM A CKNCJ IQ MNRQSOOKIED RN RHE ELSKARINM OPNBE
W @HEM RHE ELSKARINM OPNBE IQ MNR TNPJIMG OPNOEPKU