User`s manual
22 / 46
3.3.2 External Trigger Signal Input/Event Output Connectors
For the external trigger signal input/event output connector, insert the external trigger signal input/
event output cable shown in Figure 3.6. The external trigger signal input/event output cable is a
9-pin cable, inputs the external trigger signal, and outputs the break signal and event signal.
The external trigger signal input/event output signal is input/output at CMOS (LVCC3245) level.
Break signals are held low when the break conditions are satisfied. And, event signals are held
high while events 1 through 6 specified as breakpoints are established.
Table 3.4 gives pin assignments of the external trigger signal input/event output connectors.
Table 3.4 Pin assignments of external trigger signal input/event output connectors
Pin No. Signal Cable Color Pin No. Signal Cable Color
1
EXT0/EV0:
input/output
White 6
EXT5/EV5:
input/output
Green
2
EXT1/EV1:
input/output
Brown 7
EXT6/EV6:
input/output
Blue
3
EXT2/EV2:
input/output
Red 8
EXT7/BRKOUT:
input/output
Purple
4
EXT3/EV3:
input/output
Orange 9 GND Black
5
EXT4/EV4:
input/output
Yellow - - -
Figure 3.6 External trigger signal input/event output cable
785
6><2
6><1
6><0
6></
6><.
6><-
6><,
6><+
785
6><2
6><1
6><0
6></
6><.
6><-
6><,
6><+
7853 4H@AG
6><23 :NLKHC
6><13 4HNC
6><03 7LCCI
6></3 ?CHHJO
6><.3 9L@IDC
6><-3 ;CB
6><,3 4LJOI
6><+3 =EFMC