Specifications

V850E2/MN4 USB CDC (Communication Device Class) Driver
R01AN0010EJ0101 Rev.1.01 Page 89 of 117
Feb 01, 2012
6.5.2 Loading and Executing
You write (load) the generated load module into the target for execution.
(1)
Programming the Load Module
Shown below is the procedure to program a load module into the RTE-V850E2/MN4-EB-S via Multi.
<1> Choose “Connect” from the Multi’s “Connect” menu to open the Connection Chooser.
Figure 6.45 Starting the Connection Chooser
<2> From the Connection Chooser, select the MINICUBE connection settings you created according to the procedure
explained in section 6.4.1, Setting up the Host Environment, and click the “Connect” button.
Figure 6.46 Selecting the MINICUBE Connection Settings