User manual

V850E2/MN4 Timer Array Unit Control
R01AN0922EJ0100 Rev.1.00 Page 50 of 54
Jan 13, 2012
4.4.9 TAUJn Output Registers
• TAUJn channel output enable register (TAUJnTOE)
This register enables or disables independent channel output mode controlled by software. In this sample program, the
TAUJ is set to signal width measurement function. The TAUJ disables the independent macro output function.
Figure 4.45 TAUJnTOE Register Format
Setting example
TAUJ0TOE = 0x0000; /* channel single mode */
• TAUJn channel output mode register (TAUJnTOM)
This register specifies the output mode of each channel. In this sample program, the TAUJ does not use the output
function.
• TAUJn channel output configuration register (TAUJnTOC)
This register specifies the output mode of each channel in combination with TAUJnTOMm. In this sample program, the
TAUJ does not use the output function.