User`s manual

4.Using
4.2.2. Starting KD38
1)Click “Start” - “Program” - “RENESAS-TOOLS” - “KD38 V.x.xx" - “KD38" from the start
menu to start the KD38. When the KD38 starts, the INIT screen of the KD38 which is
shown in Figure 4-9 will be open. When a window is open, click “Refer” and select
the target MCU.
Click!
Figure 4-9 INIT Screen 1 of KD38
2)Next, Figure 4-10 will be open. Select “M37544STK.MCU” on the target MCU.
Figure 4-10 MCU File Screen
39