User`s manual

4.Using

4.1.2. Assembling with TM

1)This sub-section describes how to use the TM easily with a sample program attached

to the CD-ROM as an example. Refer to the TM user’s manual for how to use the

TM. It is possible to browse the TM user’s manual in order of “Start” - “Program” -

“RENESAS-TOOLS” - “TM V.x.xx” - “TM user’s manual”.

2)Copy the sample program (\English\M3A7535\PROGRAM) included CD-ROM to the

rewritable drive such as a hard-disc. Next, modify the drive which can be read or

written by property of the file since the copied sample program folder and file

attribute in a folder is set to “Read-only”.

3)Starting TM

When clicking in order of “Start” - “Program” - “RENESAS-TOOLS” - “TM V.x.xx”” -

“TM” for the TM, the window will appear. (Refer to Figure 4-2 TM Project Bar)

(1) (2)

(3)

Figure 4-2 TM Project Bar