To our customers, Old Company Name in Catalogs and Other Documents On April 1st, 2010, NEC Electronics Corporation merged with Renesas Technology Corporation, and Renesas Electronics Corporation took over all the business of both companies. Therefore, although the old company name remains in this document, it is a valid Renesas Electronics document. We appreciate your understanding. Renesas Electronics website: http://www.renesas.
Notice 1. 2. 3. 4. 5. 6. 7. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office.
User’s Manual SH7670 CPU Board M3A-HS71 User’s Manual Renesas 32-Bit RISC Microcomputers SuperH™ RISC engine Family / SH7670 Series Rev.1.01 2008.
Table of Contents Chapter1 Overview .............................................................................................................................. 1-1 1.1 Overview .................................................................................................................................................................... 1-2 1.2 Configuration .................................................................................................................................................
3.2.1 Jumper (JP1~JP7) .......................................................................................................................................... 3-16 3.2.2 Switch and LED Functions .............................................................................................................................. 3-18 3.3 Board Dimensions of SH7670 CPU Board ............................................................................................................... 3-21 Appendix...............
Chapter1Overview Chapter1 Overview 1-1
Overview 1 1.1 Overview 1.1 Overview The SH7670 CPU board is a CPU evaluation board designed for users to evaluate the functionality and performance of the SH7670 group of Renesas Technology original microcomputers, as well as develop and evaluate the application software for this group of microcomputers. The features of the SH7670 evaluation board are as follows.
Overview 1 1.3 External Specifications 1.3 External Specifications Table 1.3.1 and Table 1.3.2 list the external specifications of SH7670 CPU board. Table 1.3.1 External Specifications of SH7670 CPU Board (1) No. Item Content SH7670 1 CPU • Input(XIN) clock: 16.67 MHz • Bus clock: Maximum 66.67 MHz, • CPU clock: Maximum 200 MHz • On-chip memory • RAM: 32KB • Instruction cache : 8 KB • Operand cache : 8 KB Power voltage: internal : 1.2 V, I/O 3.3 V 256-pin BGA 0.
Overview 1 1.3 External Specifications Table 1.3.2 External Specifications of SH7670 CPU Board (2) No. Item 7 Switch 8 Board Size Rev.1.01 2008.05.07 REJ11J0012-0101 Content • Reset switch: 1 pc. • NMI switch: 1 pc. • IRQ0 switch: 1 pc. • Test switch: 1 pc. • DIP switch for mode setting: 1 pc. (5-pole) • DIP switch for user: 1 pc. (4-pole) • Switch for PHY controller operation mode : 1 pc.
Overview 1 1.4 Block Diagram of SH7670 CPU Board 1.4 Block Diagram of SH7670 CPU Board Figure 1.4.1 shows the system block diagram of SH7670 CPU board.
Overview 1 1.5 External View 1.5 External View Figure 1.5.1 shows the SH7670 CPU board overview (the image of component placement). U11 1.2V DC converter U10 3.3V swiching regulator U2 Clock buffer ：SH7670 extension connector (Not mounted) Figure 1.5.1 SH7670 CPU Board Overview Rev.1.01 2008.05.
Overview 1 1.6 SH7670 CPU Board Memory Mapping 1.6 SH7670 CPU Board Memory Mapping Figure 1.6.1 shows the SH7670 memory mapping of the SH7670 CPU board.
Overview 1 1.7 Absolute Maximum Ratings 1.7 Absolute Maximum Ratings Table 1.7.1 lists the absolute maximum ratings of the SH7670 CPU board. Table 1.7.1 Absolute Maximum Ratings of the SH7670 CPU Board Symbol Parameter Rated Value Remarks VCC 5V system power supply voltage -0.3V to 6.0V Relative to VSS 3VCC 3.3V system power supply voltage -0.3V to 4.6V Relative to VSS 1.2VCC 1.2V system power supply voltage -0.3V to 1.
Chapter2Functional Overview Chapter2 Functional Overview 2-1
Functional Overview 2 2.1 Functional Overview 2.1 Functional Overview Table 2.1.1 lists the function modules of SH7670 CPU board. Table 2.1.1 Functional Modules of SH7670 CPU Board Section 2.2 Function CPU Content SH7670 • Input(XIN) Clock: 16.67 MHz • Bus Clock: 66.67 MHz • CPU Clock: Maximum 200 MHz 2.
Functional Overview 2 2.2 CPU 2.2 CPU 2.2.1 SH7670 Outline The SH7670 CPU board contains the 32-bit RISC microcomputer SH7670 that operates with a maximum 200MHz of CPU clock frequency. 2.2.2 SH7670 Pin Function Used on SH7670 CPU Board Table 2.2.1~Table 2.2.8 list the SH7670 pin functions used on the SH7670 CPU board. Table 2.2.
Functional Overview 2 2.2 CPU Table 2.2.
Functional Overview 2 2.2.2 SH7670 Pin Function Used on SH7670 CPU Board Table 2.2.3 SH7670 Pin Selection Used on SH7670 CPU Board (3) Type INTC Pin IRQ I/O I Function of SH7670 CPU Board Destination to Connect Interrupt Interrupt request pin which can select level • Connects to an extension connector request and edge input. Name Each IRQ pin is connected to the followings.
Functional Overview 2 2.2.2 SH7670 Pin Function Used on SH7670 CPU Board Table 2.2.
Functional Overview 2 2.2.2 SH7670 Pin Function Used on SH7670 CPU Board Table 2.2.
Functional Overview 2 2.2.2 SH7670 Pin Function Used on SH7670 CPU Board Table 2.2.
Functional Overview 2 2.2.2 SH7670 Pin Function Used on SH7670 CPU Board Table 2.2.
Functional Overview 2 2.2.2 SH7670 Pin Function Used on SH7670 CPU Board Table 2.2.
Functional Overview 2 2.2.3 SH7670 Multiplex Pin Used on the SH7670 CPU Board 2.2.3 SH7670 Multiplex Pin Used on the SH7670 CPU Board Table 2.2.9 to Table 2.2.15 list the function selections of SH7670 multiplex pin used on the SH7670 CPU board. These pins are set to the port input pin as initial values. Thus, the MD bit of port control register should be set to use the peripheral functions (except I/O port). Table 2.2.
Functional Overview 2 2.2.3 SH7670 Multiplex Pin Used on the SH7670 CPU Board Table 2.2.
Functional Overview 2 2.2.3 SH7670 Multiplex Pin Used on the SH7670 CPU Board Table 2.2.
Functional Overview 2 2.2.3 SH7670 Multiplex Pin Used on the SH7670 CPU Board Table 2.2.
Functional Overview 2 2.3 Memory 2.3 Memory The SH7670 CPU board includes the RAM (32 KB) built in SH7670, external flash memory, external SDRAM, and external EEPROM. The details are described as follows. 2.3.1 RAM built in SH7670 32 KB RAM, 8 KB instruction cache, and 8 KB operand cache are built in the SH7670. 2.3.2 Flash Memory Interface The SH7670 CPU board standard mounts the flash memory shown in Table 2.3.1 for storing the user program.
Functional Overview 2 2.3.2 Flash Memory Table 2.3.
Functional Overview 2 2.3.3 External SDRAM 2.3.3 External SDRAM Interface The SH7670 CPU board standard mounts two 32-Mbyte SDRAMs as external SDRAM. It uses the bus state controller with on-chip SH7670 to control the SDRAM. Accessing to SDRAM is 32-bit bus access. Table 2.3.3 lists the SDRAM specification used on the SH7670 CPU board, and Figure 2.3.3 shows the SDRAM interface block diagram. Table 2.3.
Functional Overview 2 2.3.3 External SDRAM Table 2.3.4 lists the example for bus state controller setting at 66.67 MHz operation for the SH7670 bus clock. Table 2.3.4 Bus State Controller Setting (SDRAM Read/Write) User Area CS3 Rev.1.01 2008.05.
Functional Overview 2 2.3.
Functional Overview 2 2.3.4U External EEPROM 2.3.4 External EEPROM Interface The SH7670 CPU board standard mounts 128k-bit EEPROM. It uses the I²C bus interface built in SH7670 to control the EEPROM. Table 2.3.5 lists the EEPROM specification outline, and Figure 2.3.5 shows the EEPROM interface block diagram. Table 2.3.5 EEPROM Specification Outline Part Number Interface Capacity Package HN58X24128FPIE Double-wire serial (I²C) 128k-bit(16k-word×8-bit) 8-pin SOP Figure 2.3.
Functional Overview 2 2.4U USB Interface 2.4 USB Interface The SH7670 mounted on the SH7670 CPU board contains the USB controller preparing for function control function and host control function for the USB standard 2.0. In addition, the USB series A receptacle is standard mounted as a connector. The board is configured to be able to mount a Mini-B receptacle. When a Mini-AB receptacle or Mini-B receptacle is mounted, the USB series A receptacle should be removed. Figure 2.4.
Functional Overview 2 2.5Serial Port Interface 2.5Serial Port Interface The SH7670 mounted on the SH7670 CPU board includes a UART module. On the SH7670 CPU board, the SCIF channel 0 is connected to the serial port connector. When the serial port interface is used, ST ch.0 cannot be used. Figure 2.5.1 shows the serial port interface block diagram on the SH7670 CPU board. Figure 2.5.1 Serial Port Interface Block Diagram Rev.1.01 2008.05.
Functional Overview 2 2.6U ST Interface 2.6 ST Interface The SH7670 CPU board includes the ST connector. When the ST interface is used, the serial port interface cannot be used. Figure 2.6.1 shows the ST interface block diagram.
Functional Overview 2 2.7U LAN Interface 2.7 LAN Interface The SH7670 mounted on the SH7670 CPU board includes the Ethernet controller in compliance with MAC layer standard of IEEE802.3. The PHY address is fixed to H'01 by the pin processing in the external circuit of PHYA00-PHYA04 pin. Figure 2.7.1 shows the LAN interface block diagram on the SH7670 CPU board. Figure 2.7.1 LAN Interface Block Diagram Rev.1.01 2008.05.
Functional Overview 2 2.7U LAN Interface The PHY controller operation mode SW (SW1) mounted on the SH7670 CPU board is the switch that determines the operation mode of Ethernet PHY controller mounted on the SH7670 CPU board. This switch is set to Low (0V) in ON, and High (3.3V) in OFF. Table 2.7.1 lists the description for PHY controller operating mode SW function. Table 2.7.
Functional Overview 2 2.8 I/O Port 2.8 I/O Port In the SH7670 CPU board, the I/O port of SH7670 is connected to the extension connector. Moreover, some I/O port are connected to the DIP switch and LED for users to be used freely. Figure 2.8.1 shows the I/O port block diagram, Table 2.8.1 lists the switch function, and Table 2.8.2 lists the I/O port function. Figure 2.8.1 I/O Port Block Diagram Rev.1.01 2008.05.
Functional Overview 2 2.8 I/O Port Table 2.8.
Functional Overview 2 2.9 Power Supply Circuit 2.9 Power Supply Circuit In the SH7670 CPU board, 5V-power supply is input to the board to generate 3.3V and 1.2V by a regulator. The regulator used is an output voltage variable type so that any voltage value can be generated by changing the resistance. Figure 2.9.1 shows the block diagram of SH7670 CPU board power supply circuit. 5V TO 3.3V LINEAR REGULATOR Flash memory 5V SDRAM Other logic IC Extension connector 3.
Functional Overview 2 2.10 Clock Module 2.10 Clock Module The clock module of SH7670 CPU board consists of two blocks. • Output from oscillator is connected to SH7670 EXTAL • Ceramic oscillator is connected to EXTAL and XTAL The 16.67MHz oscillator is connected to this board. The bus clock output from SH7670 is connected to SDRAM through dumping.
Functional Overview 2 2.11U Reset Module 2.11 Reset Module This module controls the SH7670 mounted on the SH7670 CPU board and the reset signal connected to flash memory and PHY-LSI. Figure 2.11.1 shows the SH7670 CPU board reset module block diagram. Figure 2.11.1 Reset Module Block Diagram Rev.1.01 2008.05.
Functional Overview 2 2.12U Interrupt Switch 2.12 Interrupt Switch In the SH7670 CPU board, the push switches are connected to the SH7670 NMI pin and IRQ0 pin. Users can freely use the test switch by wiring a jumper on the TP pin. Figure 2.12.1 shows the interrupt switch block diagram. Figure 2.12.1 Interrupt Switch Block Diagram Rev.1.01 2008.05.
Functional Overview 2 2.13 E10A-USB Interface 2.13 E10A-USB Interface The SH7670 CPU board contains a 14-pin H-UDI connector to connect to the E10A-USB. Figure 2.13.1 shows the E10A-USB interface block diagram. Figure 2.13.1 E10A-USB Interface Block Diagram Rev.1.01 2008.05.
Chapter3Operational Specifications Chapter3 Operational Specifications 3-1
Operational Specifications 3 3.1U SH7670 CPU Board Connector Overview 3.1 SH7670 CPU Board Connector Overview Figure 3.1.1 shows the SH7670 CPU board connector assignments. J3 J1 J15 J17 J20 J7 J16 J14 J10 J18 Figure 3.1.1 SH7670 CPU Board Connector Assignments Rev.1.01 2008.05.
Operational Specifications 3 3.1.1 LAN Connector (J1) 3.1.1 LAN Connector (J1) The SH7670 CPU board includes the LAN connector (J1). Figure 3.1.2 shows the LAN connector pin assignments (J1). Figure 3.1.2 LAN Connector Pin Assignments (J1) Table 3.1.1 lists the LAN connector pin assignments (J1). Table 3.1.1 LAN Connector Pin Assignments (J1) Pin Signal Name Pin Signal Name 1 TD+ 2 TD- 3 TCT 4 RD+ 5 RD- 6 RCT 7 NC 8 NC Rev.1.01 2008.05.
Operational Specifications 3 3.1.2 USB Connector (J3) 3.1.2USB Connector (J3) The SH7670 CPU board includes the USB connector. Figure 3.1.3 shows the USB connector pin assignments. Figure 3.1.3 USB Connector Pin Assignments (J3) Table 3.1.2 lists the USB connector pin assignments (J3). Table 3.1.2 USB Connector Pin Assignments (J3) Pin 1 3 Signal Name Pin Signal Name VBUS 2 DM DP 4 GND Rev.1.01 2008.05.
Operational Specifications 3 3.1.3 Extension Connector (J5,J6,J8,J9,J11,J12, and J13) 3.1.3 Extension Connector (J5,J6,J8,J9,J11,J12, and J13) The SH7670 CPU board has the through-holes for mounting extension connectors which I/O pin of SH7670 is connected. The MIL standard connector can be mounted on J5, J6, J8, J9, J11, J12, and J13 so that it can be used for the connection with extension board, the monitoring of SH7670 bus signal and so forth. Figure 3.1.
Operational Specifications 3 3.1.3 Extension Connector (J5,J6,J8,J9,J11,J12, and J13) Table 3.1.3 to Table 3.1.9 list the extension connector pin assignments (J5,J6,J8,J9,J11,J12, and J13). Table 3.1.
Operational Specifications 3 3.1.3 Extension Connector (J5,J6,J8,J9,J11,J12, and J13) Table 3.1.
Operational Specifications 3 3.1.3 Extension Connector (J5,J6,J8,J9,J11,J12, and J13) Table 3.1.8 Extension Connector Pin Assignments (J12) Pin Signal Name Pin Signal Name 1 +3.3V 2 +3.3V 3 RES# 4 RESET_IN# 5 RD# 6 CS0# WDTOVF# 8 NC NC 10 NC PA24/A24 7 9 11 HIFMD/PA25/A25 12 13 PA23/A23 14 PA22/A22 15 PA21/A21 16 PA20/A20 17 PA19/A19 18 PA18/A18 19 PA17/A17 20 GND 21 +3.3V 22 +3.
Operational Specifications 3 3.1.4 STIF Connector (J7,J10) 3.1.4 STIF Connector (J7,J10) The SH7670 CPU board includes the STIF connector to which the SH7670 output pin is connected. The MIL standard connector can be mounted on J7 and J10. Figure 3.1.5 shows the pin assignments of STIF connector. Figure 3.1.5 Pin Assignment of STIF Connector Rev.1.01 2008.05.
Operational Specifications 3 3.1.4 STIF Connector (J7,J10) Table 3.1.10 lists the pin assignments of STIF connector (J7). Table 3.1.
Operational Specifications 3 3.1.5 External Power Supply Connector (J14 and J18) 3.1.5 External Power Supply Connector (J14 and J18) The SH7670 CPU board has the through-holes for the external power supply connector (J14: 3.3V supply, J18: 1.2V supply) for SH7670. Figure 3.1.6 shows the pin assignments of external power supply connector (J14 and J18). Figure 3.1.6 Pin Assignments of External Power Supply Connector (J14 and J18) Table 3.1.12 and Table 3.1.
Operational Specifications 3 3.1.6 Power Supply Connector (J15) 3.1.6 Power Supply Connector (J15) The SH7670 CPU board includes the connector for power supply. Figure 3.1.7 shows the pin assignment of power supply connector (J15). Figure 3.1.7 Pin Assignment of Power Supply Connector (J15) Table 3.1.14 lists the pin assignment of power supply connector (J15). Table 3.1.14 Pin Assignment of Power Supply Connector (J15) Pin 1 Signal Name +5V Rev.1.01 2008.05.
Operational Specifications 3 3.1.7 H-UDI Connector (J16) 3.1.7 H-UDI Connector (J16) The SH7670 CPU board includes the H-UDI (J16) connector for E10A-USB emulator connection. Figure 3.1.8 shows the pin assignment of H-UDI connector (J16). Figure 3.1.8 Pin Assignment of H-UDI Connector (J16) Table 3.1.15 lists the pin assignment of H-UDI connector (J16). Table 3.1.15 Pin Assignment of H-UDI Connector (J16) Pin Signal Name Pin Signal Name 1 TCK 2 TRST# 3 TDO 4 N.C.
Operational Specifications 3 3.1.8U UART Connector (J20) 3.1.8 UART Connector (J20) The SH7670 CPU board includes the UART connector (J20). Figure 3.1.9 shows the pin assignment of UART connector (J20). Figure 3.1.9 Pin Assignment of UART Connector (J20) Table 3.1.16 lists the pin assignment of UART connector (J20). Table 3.1.
Operational Specifications 3 3.2U Switch and LED Outline 3.2 Switch and LED Outline The SH7670 CPU board includes switches and LEDs as its operational components. Figure 3.2.1 shows the assignment of SH7670 CPU board operational components. Figure 3.2.1 SH7670 CPU Board Operational Component Assignment Rev.1.01 2008.05.
Operational Specifications 3 3.2.1U Jumper (JP1~JP7) 3.2.1 Jumper (JP1~JP7) The SH7670 CPU board includes seven jumpers. Figure 3.2.2 shows the assignment of SH7670 CPU board jumpers (JP1~JP7), and Table 3.2.1~Table 3.2.3 list the SH7670 CPU board jumper settings (JP1~JP7). JP1 Top view of the component side 3 JP5 JP2 1 PWRSEL JP7 JP3 1 3 3.3V PWRSEL JP4 1 3 1.2V PWRSEL JP6 Figure 3.2.2 Assignment of SH7670 CPU board Jumpers (JP1~JP7) Rev.1.01 2008.05.
Operational Specifications 3 3.2.1U Jumper (JP1~JP7) Table 3.2.1 Jumper Setting for USB Module (JP1) Jumper JP1 Setting 1-2 None (Open) Function USB HOST mode [VBUS power is supplied] USB Function mode [VBUS power is not supplied] Table 3.2.2 Jumper Setting for SH7670 Power Supply Switch (JP2,JP3,JP4) Jumper Setting Function JP2 1-2 External power supply voltage (Supplied from J15) PWRSEL 2-3 External power supply voltage (Supplied from J17) JP3 1-2 3.
Operational Specifications 3 3.2.2U Switch and LED Functions 3.2.2 Switch and LED Functions The SH7670 CPU board includes eight switches and ten LEDs. Figure 3.2.3 shows the pin assignment of switches and LEDs mounted on SH7670 CPU board, and Table 3.2.4 lists the switches mounted on SH7670 CPU board. Figure 3.2.3 Pin Assignment of Switches and LEDs on SH7670 CPU board Table 3.2.4 Switches on SH7670 CPU board No. Function Remarks SW1 Switch for PHY controller operation setting Refer to Table 3.2.
Operational Specifications 3 3.2.2U Switch and LED Functions Table 3.2.5 lists the functions of switch SW8. Table 3.2.6 lists the functions of switch SW1. indicates the default. Table 3.2.5 Data Mode Setting Switch Function No.
Operational Specifications 3 3.2.2U Switch and LED Functions Table 3.2.7 lists the functions of LEDs mounted on SH7670 CPU board. Table 3.2.7 LED Functions on SH7670 CPU Board No.
Operational Specifications 3 3.3U Board Dimensions of SH7670 CPU Board 3.3 Board Dimensions of SH7670 CPU Board Figure 3.3.1 shows board dimensions of SH7670 CPU board. Connectors can be mounted on J5-J13 so that the connection to an extension board can be easily enhanced. < Top view of component side perspective > Figure 3.3.1 Board Dimensions of SH7670 CPU board Rev.1.01 2008.05.
Operational Specifications 3 3.3U Board Dimensions of SH7670 CPU Board *This is a blank page* Rev.1.01 2008.05.
Appendix SCHEMATICS A-1
*This is a blank page* A-2
1 2 3 4 5 SH7670 CPU board M3A-HS71 SCHEMATICS A A B TITLE PAGE INDEX SH7670 FLASH/SDRAM Memory Card Slot,USB Ether,EEPROM Other Connectors H-UDI,Reset,Power Switch,Holes 1 2 3 4 5 6 7 Note: VCC = Digital 5V 3VCC = 3.3V 3VCC_CPU = 3.3V SDVCC = 3.3V 1.2VCC = 1.2V 3AVCC = Analog 3.3V UA3V = USB Analog 3.3V UA1.2V = USB Analog 1.
5 4 [16.67MHz:CPU]CERALOCK Type _1MΩ X1 3 2 R16 1 _CSTCE16M6V R10 0Ω [5,7] PB07/BS# [3,5] RD# [3,5] WE0#/DQMLL [3,5] WE1#/DQMLU/WE# [3,5] WE2#/DQMUL/ICIORD# [3,5] WE3#/DQMUU/ICIOWR# [3,5] RD/WR# [3,5] CKE [3,5] RAS# [3,5] CAS# [5] EXCLK _0Ω 8 3 2 5 7 CLKOUT CLK1 CLK2 CLK3 CLK4 REF 1 VDD 6 GND 4 3VCC CP2 _0.
1 2 FLASH 3 4 FLASH CS0 16bit access = 8MByte [2,5] D[0:31] [2,5,7] A[0:25] 5 SDRAM D[0:31] D[0:31] A[0:25] SA[2:16] SDRAM 32bit access = 64MB 3VCC A 3VCC_SDRAM R42 A4.7KΩ 8 7 6 5 A4.7KΩ 8 7 6 5 A23 A24 A22 A21 A19 A18 A17 A20 3VCC R47 4.7KΩ [2,4,5,6] R45 4.7KΩ R46 4.
5 4 3 2 Memory Card Slot ETHER PHY-LSI Power Control PWFBOUT MCVCC U6 D 3 4 EN1 EN0 6 7 3VIN 3VIN 2 5VIN OUT OUT L1 PWFBOUT 1 8 + CE6 1µF 3AVCC R73 10KΩ SDCD SDWP R70 R74 22Ω 22Ω Memory Card Slot [2,5] PC10/RX_CLK 5 10 MCVCC PWFBOUT PWFBIN RA24 A10KΩ TP9 TP10TP11TP12TP13TP14 PC08/RX_DV PC09/RXER PC15/CRS PC14/COL R79 R81 22Ω 22Ω R83 22Ω R85 R86 R87 C 8 7 6 5 4 3 2 1 9 22Ω 22Ω 22Ω CP63 0.
5 4 3 2 1 VCC ST Connector SH7670 Extension 1.
1 2 3 4 5 Power LED H-UDI Interface 5V To 3.3V Linear Regulator 3VCC 3.3V External VCC 3VCC 3VCC_EX J14 5 10 R124 1KΩ 1-2 Power On 2-3 Power Off Power Switch 1 2 3 4 6 7 8 9 J15 S2B-XH-A JP2 1 2 1 2 3 4 5 6 7 R125 0Ω XG8V-0334 TCK _TRST TDO N.C.
5 4 3 2 1 NMI SWITCH CIRCUIT User Port 3VCC R139 10KΩ R142 100Ω 3VCC 1 2 3 4 R144 0Ω NMI [2] R143 360Ω R140 360Ω R145 360Ω R141 360Ω LED7 SML-311YT LED8 SML-311YT LED9 SML-311YT LED10 SML-311YT TP33 TP34 TP35 TP36 PC20 PE00 PE08 PE10 D SW4 B3SN-3012 NMI SWITCH D U16B SN74LVC14_3 U16A SN74LVC14_3 + CE17 4.7µF Decoupling Caps [2,5] PC20/WOL 3VCC [2,5] PE00 CP72 0.
*This is a blank page*
Revision History Rev. SH7670 CPU Board M3A-HS71User's Manual Date of Issue Content of Revision Page Page 1.00 08/01/09 － First edition issued 1.01 08/05/07 － Revision history page location was changed. Colophon was changed from ©2007 to ©2008.
*This is a blank page*
SH7670 CPU Board User's Manual M3A-HS71 Date of issue 2008.05.07 Rev. 1.01 Published by Renesas Technology Corp. Renesas Solutions Corp. © 2008. Renesas Technology Corp., All rights reserved. Printed in Japan.
SH7670 CPU Board M3A-HS71 User’s Manual 1753, Shimonumabe, Nakahara-ku, Kawasaki-shi, Kanagawa 211-8668 Japan REJ11J0012-0101
