User's Manual

Overview

1.3 External Specification

Rev.1.01 Oct 28, 2008 1-3

REJ10J1351-0101

1.3 External Specifications

Table 1.3.1 lists external specifications.

Table 1.3.1 External Specifications

No. Items Description

1 CPU SH7619

• Input (XIN) clock: 15.625 MHz

• Bus clock: 62.5 MHz at maximum

• CPU clock: 125 MHz at maximum

2 Memories • SDRAM (16-bit data bus)

• EDS1216AATA-75E: 1 (16 MB)

• Flash memory (16-bit data bus)

• S29GL032A90TFIR4: 1 (4 MB)

• EEPROM (Serial)

• S93C76AFT-V-G: 1 (8 KB, 512 x 16)

3 Connectors • Expansion Connector (Bus, I/O, VCC, GND: 140 pins in total: Through-hole)

• Channel 1 serial port connector (2-pin: Through-hole)

• Channel 2 serial port connector (D-sub 9-pin)

• RS-422 serial connector (4-pin: Through-hole)

• RJ-45 LAN connector (8-pin, RJ-45)

• PC card connector (68-pin)

• H-UDI connector (14-pin)

• Power connector (2-pin: 5 V)

• External power connector (2-pin: 1.8 V: Through-hole)

4 LEDs • Power LED: 1

• User LEDs: 4

5 Switches • Power switch: 1

• Reset push-button switch: 1

• NMI push-button switch: 1

• IRQ0 push-button switch: 1

• User DIP switches: 4/package

• Mode DIP switches: 4/package

• 1.8 V external switch jumper: 1

• PCMCIA power switch jumper: 1

• PCMCIA bus switch enable jumper: 1

• Expansion connector signal select jumpers: 5

6 Dimensions • Dimensions: 100 mm x 100 mm

• Mounting form:6 layers, double-sided

• Board configuration:1 board