User`s manual

( 36 / 48 )
4.2 Connecting the Emulation Pod
The procedure for connecting the emulation pod to the emulator PC4701U is shown below. The
screws for fixing the emulator is supplied with the product package of an emulation pod.
Turn off the power to the emulator PC4701U.
Connect the emulation pod to the connector of the emulator PC4701U.
Figure 4.9 Connecting emulation pod (below)
Secure the connector with the two screws.
Figure 4.9 Connecting emulation pod (below)
Figure 4.9 Connecting emulation pod