Datasheet

M32C/87 Group (M32C/87, M32C/87A, M32C/87B) 5. Electrical Characteristics
REJ03B0127-0151 Rev.1.51 Jul 31, 2008
Page 52 of 85
Table 5.6 Electrical Characteristics (2/3)
(VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Topr = -20 to 85°C, f(CPU) = 32 MHz unless
otherwise specified)
NOTE:
1. P11 to P15 are provided in the 144-pin package only.
Symbol Parameter
Measurement
Condition
Standard
Unit
Min. Typ. Max.
IIH Input high
“H” current
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7
(1)
, XIN, RESET, CNVSS,
BYTE
VI = 5 V 5.0 μA
IIL Input low “L”
current
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7,
P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7
(1)
, XIN, RESET, CNVSS,
BYTE
VI = 0V -5.0 μA
RPULLUP Pull-up
resistance
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7,P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7
(1)
VI = 0V 30 50 167 kΩ
RfXIN Feedback
resistance
XIN 1.5 MΩ
RfXCIN Feedback
resistance
XCIN 10 MΩ
VRAM RAM data
retention
voltage
In stop mode 2.0 V
VCC1 = VCC2 = 5V