Datasheet

M32C/87 Group (M32C/87, M32C/87A, M32C/87B) 5. Electrical Characteristics
REJ03B0127-0151 Rev.1.51 Jul 31, 2008
Page 51 of 85
Table 5.5 Electrical Characteristics (1/3)
(VCC1 = VCC2 = 4.2 to 5.5 V, VSS = 0 V, Topr = -20 to 85°C, f(CPU) = 32 MHz unless
otherwise specified)
NOTE:
1. P11 to P15 are provided in the 144-pin package only.
Symbol Parameter
Measurement
Condition
Standard
Unit
Min. Typ. Max.
VOH Output
high “H”
voltage
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7
(1)
IOH = -5 mA
VCC2 - 2.0
VCC2 V
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7,P10_0 to P10_7,
P14_0 to P14_6, P15_0 to P15_7
(1)
IOH = -5 mA
VCC1 - 2.0
VCC1
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7
(1)
IOH = -200 μA
VCC2 - 0.3
VCC2 V
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7,P10_0 to P10_7,
P14_0 to P14_6, P15_0 to P15_7
(1)
IOH = -200 μA
VCC1 - 0.3
VCC1
XOUT IOH = -1 mA 3.0 VCC1 V
XCOUT Drive capability
= high
No load
applied
2.5 V
Drive capability
= low
No load
applied
1.6 V
VOL Output low
“L” voltage
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7,P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7
(1)
IOL = 5 mA 2.0 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7,
P3_0 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_4,
P8_6, P8_7, P9_0 to P9_7,P10_0 to P10_7,
P11_0 to P11_4, P12_0 to P12_7,
P13_0 to P13_7, P14_0 to P14_6,
P15_0 to P15_7
(1)
IOL = 200 μA0.45V
XOUT IOL = 1 mA 2.0 V
XCOUT Drive capability
= high
No load
applied
0V
Drive capability
= low
No load
applied
0V
VT+ - VT- Hysteresis
HOLD, RDY, TA0IN to TA4IN,
TB0IN to TB5IN, INT0 to INT8, ADTRG,
CTS0 to CTS6, CLK0 to CLK6,
TA0OUT to TA4OUT, NMI
, KI0 to KI3,
RXD0 to RXD6, SCL0 to SCL4,
SDA0 to SDA4, INPC1_0 to INPC1_7,
ISCLK0 to ISCLK2, ISRXD0 to ISRXD2,
IEIN, CAN0IN, CAN1IN, CAN1WU
0.2 1.0 V
RESET
0.2 1.8 V
VCC1 = VCC2 = 5V