Datasheet

Description
Page Summary
A - 5
Rev. Date
4.00 Aug 05, 2005 P110 T.1.15.2 is changed.
P114 L1-L11 are added.
P116 L1-L10 are added.
P118 F.1.16.1 is changed.
P119 T.1.16.2 is changed.
P121 T.1.16.4 is changed.
P123 L8-L16 are added.
P130 Text is changed.
P137 L2, L5-L6 and L12 are changed.
P147 Note is added.
P151 T.1.19.3 is changed.
P160 T.1.20.1 is changed.
P165 L12-L13 are added.
P176 T.1.21.4 is changed.
P188 to Appendix is added.
P190
5.00 Apr 24, 2009 1 Overview “AMR (Automatic Meter Reading)” → “smart metering”
2 Table 1.1.1 Operating Ambient Temperature “-40 to 105 ° C” is added.
3 Table 1.1.2 “Error Correction” → “Error Correction/Detection”
About Firmware “(Product name: D2DL)” is added.
5 Table 1.1.3 is revised.
Table 1.1.4 is added.
Figure 1.1.2 is revised.
6 Table 1.1.5 and 1.1.6 are added.
Figure 1.1.3 is revised.
8 Table 1.1.7 P85 is revised.
13 Address 000416 After reset “000000002” → “XXXX0X002”
Address 000516 After reset “000010002” → “00XX10102”
24 Table 1.6.3 title is added.
25 Figure 1.6.2 After reset “000000002” → “XXXX0X002”
“000000112 (CNVSS pin =“H”)” is deleted.
Figure 1.6.3 After reset “0X0010002” → “00XX10X02”
28 Figure 1.7.1 is revised.
33 (1) Main Clock “Xin” → “XIN”
41 “Figure 1.7.8...transition.” is deleted.
42 Figure 1.7.8 Note 1 to Note 4 are revised.
61 Figure 1.9.10 Note 1 “INT5IC” → “INT3IC”
66 Watchdog Timer “If a sub-clock is...no matter how the WDC7 bit is set.” is deleted.
78 Figure 1.12.1 is revised.