User`s manual

( 64 / 74 )

6.1 Flowchart to Remedy the Troubles

Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated until the emulator

debugger starts up. For the latest FAQs visit the Renesas Tools Homepage.

http://www.renesas.com/en/tools

Figure 6.1 Flowchart to remedy the troubles

Turning on PC7501

Front panel LED

of PC7501

1. Check emulator system connections.

See, "3.4 Connecting the PC7501" (page 33).

2. Redownload the firmware.

See "4.2 Downloading Firmware" (page 48).

3. Restart the PC7501 system.

Init dialog box of emulator

debugger displayed

1. Check the operating environment etc. of the emulator

debugger.

See the user's manual of the emulator debugger.

2. Reinstall the emulator debugger.

MCU Setting dialog box of

emulator debugger displayed

See 6.2 (3) MCU Setting Dialog Box Does Not Appear

at Debugger Startup (target not connected) (page 67).

Program window of

emulator debugger displayed

See 6.2 (4) Errors Occur at Debugger Startup (target

connected) (page 67).

Emulator debugger startup completed

Normal

Not normal

Not normal/Error displayed

Error displayed