User`s manual

( 52 / 74 )
5.1 Specifications
Table 5.1 Specifications of the M306NKT-EPB
Emulator PC7501
Applicable MCU M16C/6N Group M16C/6NK, M16C/6NL, M16C/6NM, M16C/6NN, M16C/6N4,
M16C/6N5
Evaluation MCU M306NMFJGP (two pieces)
ROM: 512 KB + 4 KB, RAM: 31 KB
Operating modes Single-chip mode
Memory expansion mode
Microprocessor mode
Maximum operating frequency 20 MHz (when using PLL):
4.2--5.5 V
M16C/6N4
M16C/6N5
Applicable voltage 4.2--5.5 V
Operating modes Single-chip mode
Maximum operating frequency 24MHz (when using PLL):
3.0--5.5 V
Operating modes
Maximum operating frequency
Operating voltage
M16C/6NK
M16C/6NL
M16C/6NM
M16C/6NN
Applicable voltage 3.0--5.5 V
Emulation memory (1) 512 KB + 4 KB for internal ROM of MCU
0F000h--0FFFFh, 80000h--FFFFFh, maximum operating frequency: 24 MHz,
0 wait
* When "Disable the Internal Flash ROM" is checked in the MCU tab of the
emulator debugger's MCU Setting dialog box, it is 10 MHz, 0 wait.
(2) 31 KB for internal RAM
00400h--07FFFh, maximum operating frequency: 24 MHz, 0 wait
(3) CS3*--CS0* area
Possible to allocate by 4 KB, maximum operating frequency: 10 MHz, 0 wait
Clock oscillator X
IN
-X
OUT
(1 to 16 MHz):
Internal oscillator circuit board
Switchable to external oscillator input or internal generator circuit
X
CIN
-X
COUT
(32.768 kHz):
Internal oscillator circuit board
Switchable to external oscillator input
Operating temperature 5 to 35°C (no dew)
Storage temperature -10 to 60°C (no dew)
Power supply to emulator Supplied from DC power supply of the emulator main unit
Connection to user system
(For details, see section 3.5.)
Applicable MCUs:
M16C/6N4
M16C/6N5
For 100-pin LCC socket:
M30800T-PTC (included) + IC61-1004-051 (included)
For 100-pin 0.65-mm-pitch QFP (100P6S-A):
(1) M30800T-PTC (included) + M3T-100LCC-DMS (not included) +
M3T-DIRECT100S (not included)
(2) M30800T-PTC (included) + M3T-100LCC-DMS (not included) +
M3T-DUMMY100S (not included)
(3) M30800T-PTC (included) + M3T-100LCC-DMS (not included) +
M3T-FLX-100NRB (not included)
Connection to user system
(For details, see section 3.6.)
Applicable MCUs:
M16C/6NK
M16C/6NL
M16C/6NM
M16C/6NN
For 100-pin 0.5-mm-pitch LQFP (100P6Q-A):
(1) M3T-F160-100NSD (not included)
(2) M30800T-PTC (included) + M3T-100LCC-QSD (not included)
(3) M30800T-PTC (included) + M3T-100LCC-DMS (not included) +
M3T-FLX-100NSD (not included)
For 128-pin 0.5-mm-pitch LQFP (128P6Q-A):
M3T-FLX-128NRD (not included)