User`s manual

Chapter 3. Setup
( 33 / 74 )
3.4 Connecting the PC7501
Figure 3.9 shows how to connect the PC7501 and the emulation probe.
Figure 3.9 Connecting the PC7501 and the emulation probe
CAUTION
Notes on Connecting the PC7501:
z When connecting the emulation probe, be sure to hold the both sides of the emulation probe horizontally
and insert it directly.
z Always shut OFF power before connecting the emulation probe. Otherwise, internal circuits may be
damaged.
z The connectors of the M306NKT-EPB are guaranteed for only 50 insertion/removal iterations.
M3T-FLX160-EPB
M306NKT-EPB