User`s manual

( 20 / 74 )
2.1 Package Components
The M306NKT-EPB package consists of the following items. When unpacking it, check to see if your M306NKT-EPB
contains all of these items.
Table 2.1 Package components
Item Quantity
M306NKT-EPB emulation probe 1
M30800T-PTC converter board for 100-pin 0.65-mm-pitch LCC 1
IC61-1004-051 LCC socket (100-pin 0.65-mm-pitch) made by Yamaichi Electronics Co., Ltd. 1
OSC-3 (16 MHz) oscillator circuit board 1
OSC-2 oscillator circuit bare board 1
Resistor arrays (51 kΩ) for ports P0 to P5 pullup 6
Hardware tool user registration FAX sheet (English) 1
Hardware tool user registration FAX sheet (Japanese) 1
M306NKT-EPB User's Manual (this manual) 1
M306NKT-EPB User's Manual (Japanese) 1
* Please keep the M306NKT-EPB's packing box and cushion material in your place for reuse at a later time when
sending your product for repair or other purposes. Always use these packing box and cushion material when
transporting this product.
* If there is any question or doubt about the packaged product, contact your local distributor.
* For purchasing the IC61-1004-051 or for technical information, contact Yamaichi Electronics Co., Ltd.
http://www.yamaichi.co.jp/e/index.shtml
2.2 Other Tool Products Required for Development
To bring forward programs development on the M16C/6N Group M16C/6NK, M16C/6NL, M16C/6NM, M16C/6NN,
M16C/6N4, M16C/6N5, the products listed below are necessary in addition to those contained package above. Get them
separately.
Table 2.2 Other tool products required for development
Product Product name Notes
Emulator main unit PC7501 Required
Emulator debugger M3T-PD30F Required
M3T-100LCC-DMS
+
M3T-DIRECT100S
M3T-100LCC-DMS
+
M3T-DUMMY100S
100-pin 0.65-mm-pitch QFP
(100P6S-A)
M3T-100LCC-DMS
+
M3T-FLX-100NRB
Required according to a foot pattern of a user
system
See "3.5 Connecting the User System
(M16C/6N4, /6N5)" (page 34).
M3T-F160-100NSD
M3T-100LCC-QSD
100-pin 0.5-mm-pitch LQFP
(100P6Q-A)
M3T-100LCC-DMS
+
M3T-FLX-100NSD
Converter board
128-pin 0.5-mm-pitch LQFP
(128P6Q-A)
M3T-F160-128NRD
Required according to a foot pattern of a user
system
See "3.6 Connecting the User System
(M16C/6NK, /6NL, /6NM, /6NN)" (page 39).
* For purchasing these products, contact your local distributor.