Datasheet
REVISION HISTORY M16C/6N Group (M16C/6N4) Data Sheet
Rev. Date
Description
Page Summary
A-1
1.00
Jun. 30, 2003
2.00
Nov. 10, 2004
– First edition issued
– Revised edition issued
* Words standardizes (on-chip oscillator)
* 100P6Q-A (100-pin version) is added.
* Revised parts and revised contents are as follows (except for change of a layout
and an expressional change).
1 1. Overview 3rd line: "and LQFP" is added.
2 Table 1.1 Performance outline of M16C/6N Group (M16C/6N4)
• Operation Mode is added.
• Address Space is added.
• Power Consumption is revised.
• "LQFP" is added to Package.
4 Table 1.2 Product List is revised.
Figure 1.2 Type No., Memory Size, and Package:
• "GP: Package 100P6Q-A" is added to Package type.
5 Figure 1.3 Pin Configuration (Top View) (1): "ZP" is added.
6 Figure 1.4 Pin Configuration (Top View) (2) is added. (100P6Q-A)
8 Table 1.4 Pin Description (2): "ZP" is added to Timer A.
12 3. Memory
• 5th to 6th lines: The description about the flash memory version (block A) is added.
Figure 3.1 Memory Map
• Interenal ROM (data area) is added.
• NOTES 3, 4 are added and NOTE 5 is revised.
13 Table 4.1 SFR Information (1)
• The value of After Reset in PM1 register is revised.
• The value of After Reset in CM2 register is revised.
19 Table 4.7 SFR Information (7)
• The value of After Reset in FMR0 register is revised.
27 Table 4.15 SFR Information (15)
• The value of After Reset in U0C1 register is revised.
• The value of After Reset in U1C1 register is revised.
• NOTE 1 is added.
28 Table 4.16 SFR Information (16)
• The value of After Reset in DA0, DA1 registers are revised.
29 Table 5.1 Absolute Maximum Ratings
• "Flash Program Erase" in Operating Ambient Temperature is added.
31 Table 5.3 Recommended Operating Conditions (2)
• Parameters of Power Supply Ripple are added.
• NOTE 4 is revised.
Figure 5.1 Timing of Voltage Fluctuation is added.
32 Table 5.4 Electrical Characteristics (1): Hysteresis
• "CLK4" is revised to "CLK3", and "TA2OUT" is revised to "TA0OUT".
•
____________
Max. of Standard in RESET is revised from "2.2" to "2.5".
• XIN is added.