Datasheet

M16C/62P Group (M16C/62P, M16C/62PT) 5. Electrical Characteristics
Rev.2.41 Jan 10, 2006 Page 69 of 96
REJ03B0001-0241
VCC1=VCC2=3V
Timing Requirements
(V
CC1 = VCC2 = 3V, VSS = 0V, at Topr = −20 to 85°C / −40 to 85°C unless otherwise specified)
Table 5.40 Timer B Input (Counter Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TB) TBiIN Input Cycle Time (counted on one edge) 150 ns
t
w(TBH) TBiIN Input HIGH Pulse Width (counted on one edge) 60 ns
t
w(TBL) TBiIN Input LOW Pulse Width (counted on one edge) 60 ns
t
c(TB) TBiIN Input Cycle Time (counted on both edges) 300 ns
t
w(TBH) TBiIN Input HIGH Pulse Width (counted on both edges) 120 ns
t
w(TBL) TBiIN Input LOW Pulse Width (counted on both edges) 120 ns
Table 5.41 Timer B Input (Pulse Period Measurement Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TB) TBiIN Input Cycle Time 600 ns
t
w(TBH) TBiIN Input HIGH Pulse Width 300 ns
t
w(TBL) TBiIN Input LOW Pulse Width 300 ns
Table 5.42 Timer B Input (Pulse Width Measurement Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TB) TBiIN Input Cycle Time 600 ns
t
w(TBH) TBiIN Input HIGH Pulse Width 300 ns
t
w(TBL) TBiIN Input LOW Pulse Width 300 ns
Table 5.43 A/D Trigger Input
Symbol Parameter
Standard
Unit
Min. Max.
t
c(AD)
ADTRG Input Cycle Time
1500 ns
t
w(ADL)
ADTRG Input LOW Pulse Width
200 ns
Table 5.44 Serial Interface
Symbol Parameter
Standard
Unit
Min. Max.
t
c(CK) CLKi Input Cycle Time 300 ns
t
w(CKH) CLKi Input HIGH Pulse Width 150 ns
t
w(CKL) CLKi Input LOW Pulse Width 150 ns
t
d(C-Q) TXDi Output Delay Time 160 ns
t
h(C-Q) TXDi Hold Time 0 ns
t
su(D-C) RXDi Input Setup Time 100 ns
t
h(C-D) RXDi Input Hold Time 90 ns
Table 5.45 External Interrupt INTi Input
Symbol Parameter
Standard
Unit
Min. Max.
t
w(INH)
INTi Input HIGH Pulse Width
380 ns
t
w(INL)
INTi Input LOW Pulse Width
380 ns