Datasheet
M16C/62P Group (M16C/62P, M16C/62PT) 5. Electrical Characteristics
Rev.2.41 Jan 10, 2006 Page 83 of 96
REJ03B0001-0241
NOTES:
1. Referenced to V
CC1 = VCC2 = 4.7 to 5.5V at Topr = −40 to 85°C / −40 to 125°C unless otherwise specified.
T version =
−40 to 85 °C, V version= −40 to 125 °C.
2. The Average Output Current is the mean value within 100ms.
3. The total I
OL(peak) for ports P0, P1, P2, P8_6, P8_7, P9, P10 P1, P14_0 and P14_1 must be 80mA max. The total IOL(peak) for
ports P3, P4, P5, P6, P7, P8_0 to P8_4, P12, and P13 must be 80mA max. The total I
OH(peak) for ports P0, P1, and P2 must
be
−40mA max. The total IOH(peak) for ports P3, P4, P5, P12, and P13 must be −40mA max. The total IOH(peak) for ports P6,
P7, and P8_0 to P8_4 must be
−40mA max. The total IOH(peak) for ports P8_6, P8_7, P9 , P10, P11, P14_0, and P14_1 must
be
−40mA max.
As for 80-pin version, the total I
OL(peak) for all ports and IOH(peak) must be 80mA. max. due to one VCC and one VSS.
4. There is no external connections for port P1_0 to P1_7, P4_4 to P4_7, P7_2 to P7_5 and P9_1 in 80-pin version.
Table 5.50 Recommended Operating Conditions (1)
(1)
Symbol Parameter
Standard
Unit
Min. Typ. Max.
V
CC1, VCC2 Supply Voltage (VCC1 = VCC2) 4.0 5.0 5.5 V
AV
CC Analog Supply Voltage VCC1 V
V
SS Supply Voltage 0V
AV
SS Analog Supply Voltage 0 V
V
IH HIGH Input
Voltage
(4)
P3_1 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P12_0 to P12_7, P13_0 to P13_7
0.8VCC2 VCC2 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
(during single-chip mode)
0.8VCC2 VCC2 V
P6_0 to P6_7, P7_2 to P7_7, P8_0 to P8_7, P9_0 to P9_7,
P10_0 to P10_7, P11_0 to P11_7, P14_0, P14_1,
XIN, RESET
, CNVSS, BYTE
0.8VCC1 VCC1 V
P7_0, P7_1
0.8VCC1 6.5 V
V
IL LOW Input
Voltage
(4)
P3_1 to P3_7, P4_0 to P4_7, P5_0 to P5_7,
P12_0 to P12_7, P13_0 to P13_7
00.2VCC2 V
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0
(during single-chip mode)
00.2VCC2 V
P6_0 to P6_7, P7_0 to P7_7, P8_0 to P8_7, P9_0 to P9_7,
P10_0 to P10_7, P11_0 to P11_7, P14_0, P14_1,
XIN, RESET
, CNVSS, BYTE
00.2VCC V
I
OH(peak) HIGH Peak
Output Current
(4)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P12_0 to P12_7, P13_0 to P13_7, P14_0, P14_1
−10.0 mA
I
OH(avg) HIGH Average
Output Current
(4)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_2 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P12_0 to P12_7, P13_0 to P13_7, P14_0, P14_1
−5.0 mA
I
OL(peak) LOW Peak
Output Current
(4)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P12_0 to P12_7, P13_0 to P13_7, P14_0, P14_1
10.0 mA
I
OL(avg) LOW Average
Output Current
(4)
P0_0 to P0_7, P1_0 to P1_7, P2_0 to P2_7, P3_0 to P3_7,
P4_0 to P4_7, P5_0 to P5_7, P6_0 to P6_7, P7_0 to P7_7,
P8_0 to P8_4, P8_6, P8_7, P9_0 to P9_7, P10_0 to P10_7,
P11_0 to P11_7, P12_0 to P12_7, P13_0 to P13_7, P14_0, P14_1
5.0 mA
f(XIN) Main Clock Input Oscillation Frequency
VCC1=4.0V to 5.5V
016MHz
f(XCIN) Sub-Clock Oscillation Frequency 32.768 50 kHz
f(Ring) On-chip Oscillation Frequency 0.5 1 2 MHz
f(PLL) PLL Clock Oscillation Frequency
VCC1=4.0V to 5.5V
10 24 MHz
f(BCLK) CPU Operation Clock 0 24 MHz
t
SU(PLL) PLL Frequency Synthesizer Stabilization
Wait Time
VCC1=5.5V
20 ms