Datasheet

M16C/62P Group (M16C/62P, M16C/62PT) 5. Electrical Characteristics
Rev.2.41 Jan 10, 2006 Page 91 of 96
REJ03B0001-0241
VCC1=VCC2=5V
Timing Requirements
(V
CC1 = VCC2 = 5V, VSS = 0V, at Topr = −40 to 85°C (T version) / −40 to 125°C (V version) unless otherwise
specified)
Table 5.66 Timer B Input (Counter Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TB) TBiIN Input Cycle Time (counted on one edge) 100 ns
t
w(TBH) TBiIN Input HIGH Pulse Width (counted on one edge) 40 ns
t
w(TBL) TBiIN Input LOW Pulse Width (counted on one edge) 40 ns
t
c(TB) TBiIN Input Cycle Time (counted on both edges) 200 ns
t
w(TBH) TBiIN Input HIGH Pulse Width (counted on both edges) 80 ns
t
w(TBL) TBiIN Input LOW Pulse Width (counted on both edges) 80 ns
Table 5.67 Timer B Input (Pulse Period Measurement Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TB) TBiIN Input Cycle Time 400 ns
t
w(TBH) TBiIN Input HIGH Pulse Width 200 ns
t
w(TBL) TBiIN Input LOW Pulse Width 200 ns
Table 5.68 Timer B Input (Pulse Width Measurement Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TB) TBiIN Input Cycle Time 400 ns
t
w(TBH) TBiIN Input HIGH Pulse Width 200 ns
t
w(TBL) TBiIN Input LOW Pulse Width 200 ns
Table 5.69 A/D Trigger Input
Symbol Parameter
Standard
Unit
Min. Max.
t
c(AD)
ADTRG Input Cycle Time
1000 ns
t
w(ADL)
ADTRG input LOW Pulse Width
125 ns
Table 5.70 Serial Interface
Symbol Parameter
Standard
Unit
Min. Max.
t
c(CK) CLKi Input Cycle Time 200 ns
t
w(CKH) CLKi Input HIGH Pulse Width 100 ns
t
w(CKL) CLKi Input LOW Pulse Width 100 ns
t
d(C-Q) TXDi Output Delay Time 80 ns
t
h(C-Q) TXDi Hold Time 0 ns
t
su(D-C) RXDi Input Setup Time 70 ns
t
h(C-D) RXDi Input Hold Time 90 ns
Table 5.71 External Interrupt INTi Input
Symbol Parameter
Standard
Unit
Min. Max.
t
w(INH)
INTi Input HIGH Pulse Width
250 ns
t
w(INL)
INTi Input LOW Pulse Width
250 ns