Datasheet

M16C/62P Group (M16C/62P, M16C/62PT) 5. Electrical Characteristics
Rev.2.41 Jan 10, 2006 Page 68 of 96
REJ03B0001-0241
VCC1=VCC2=3V
Timing Requirements
(V
CC1 = VCC2 = 3V, VSS = 0V, at Topr = −20 to 85°C / −40 to 85°C unless otherwise specified)
Table 5.34 Timer A Input (Counter Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 150 ns
t
w(TAH) TAiIN Input HIGH Pulse Width 60 ns
t
w(TAL) TAiIN Input LOW Pulse Width 60 ns
Table 5.35 Timer A Input (Gating Input in Timer Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 600 ns
t
w(TAH) TAiIN Input HIGH Pulse Width 300 ns
t
w(TAL) TAiIN Input LOW Pulse Width 300 ns
Table 5.36 Timer A Input (External Trigger Input in One-shot Timer Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 300 ns
t
w(TAH) TAiIN Input HIGH Pulse Width 150 ns
t
w(TAL) TAiIN Input LOW Pulse Width 150 ns
Table 5.37 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
w(TAH) TAiIN Input HIGH Pulse Width 150 ns
t
w(TAL) TAiIN Input LOW Pulse Width 150 ns
Table 5.38 Timer A Input (Counter Increment/Decrement Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(UP) TAiOUT Input Cycle Time 3000 ns
t
w(UPH) TAiOUT Input HIGH Pulse Width 1500 ns
t
w(UPL) TAiOUT Input LOW Pulse Width 1500 ns
t
su(UP-TIN) TAiOUT Input Setup Time 600 ns
t
h(TIN-UP) TAiOUT Input Hold Time 600 ns
Table 5.39 Timer A Input (Two-phase Pulse Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 2 µs
t
su(TAIN-TAOUT) TAiOUT Input Setup Time 500 ns
t
su(TAOUT-TAIN) TAiIN Input Setup Time 500 ns