Datasheet

M16C/62P Group (M16C/62P, M16C/62PT) 5. Electrical Characteristics
Rev.2.41 Jan 10, 2006 Page 51 of 96
REJ03B0001-0241
VCC1=VCC2=5V
Timing Requirements
(V
CC1 = VCC2 = 5V, VSS = 0V, at Topr = −20 to 85°C / −40 to 85°C unless otherwise specified)
Table 5.15 Timer A Input (Counter Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 100 ns
t
w(TAH) TAiIN Input HIGH Pulse Width 40 ns
t
w(TAL) TAiIN Input LOW Pulse Width 40 ns
Table 5.16 Timer A Input (Gating Input in Timer Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 400 ns
t
w(TAH) TAiIN Input HIGH Pulse Width 200 ns
t
w(TAL) TAiIN Input LOW Pulse Width 200 ns
Table 5.17 Timer A Input (External Trigger Input in One-shot Timer Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 200 ns
t
w(TAH) TAiIN Input HIGH Pulse Width 100 ns
t
w(TAL) TAiIN Input LOW Pulse Width 100 ns
Table 5.18 Timer A Input (External Trigger Input in Pulse Width Modulation Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
w(TAH) TAiIN Input HIGH Pulse Width 100 ns
t
w(TAL) TAiIN Input LOW Pulse Width 100 ns
Table 5.19 Timer A Input (Counter Increment/Decrement Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(UP) TAiOUT Input Cycle Time 2000 ns
t
w(UPH) TAiOUT Input HIGH Pulse Width 1000 ns
t
w(UPL) TAiOUT Input LOW Pulse Width 1000 ns
t
su(UP-TIN) TAiOUT Input Setup Time 400 ns
t
h(TIN-UP) TAiOUT Input Hold Time 400 ns
Table 5.20 Timer A Input (Two-phase Pulse Input in Event Counter Mode)
Symbol Parameter
Standard
Unit
Min. Max.
t
c(TA) TAiIN Input Cycle Time 800 ns
t
su(TAIN-TAOUT) TAiOUT Input Setup Time 200 ns
t
su(TAOUT-TAIN) TAiIN Input Setup Time 200 ns