Datasheet

M16C/62P Group (M16C/62P, M16C/62PT) 5. Electrical Characteristics
Rev.2.41 Jan 10, 2006 Page 44 of 96
REJ03B0001-0241
NOTES:
1. Referenced to VCC1=VREF=3.3 to 5.5V, VSS=AVSS=0V at Topr = −20 to 85°C / −40 to 85°C unless otherwise specified.
2. This applies when using one D/A converter, with the D/A register for the unused D/A converter set to “00h”. The resistor
ladder of the A/D converter is not included. Also, when D/A register contents are not “00h”, the I
VREF will flow even if Vref id
disconnected by the A/D control register.
Table 5.5 D/A Conversion Characteristics
(1)
Symbol Parameter Measuring Condition
Standard
Unit
Min. Typ. Max.
− Resolution 8Bits
− Absolute Accuracy 1.0 %
t
SU Setup Time 3 µs
R
O Output Resistance 4 10 20 kΩ
IVREF Reference Power Supply Input Current (NOTE 2) 1.5 mA